Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (https://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   ■■■■ ESS Performance Supercharger!! (https://www.camaro5.com/forums/showthread.php?t=517605)

Ralph@ESSTuning 01-03-2018 04:23 PM

■■■■ ESS Performance Supercharger!!
 
http://foreignaffairsmotorsports.com...ess-tuning.jpg

Hey guys! I would like to introduce to you, the ESS Performance supercharger system for the Gen 5 Camaro SS! For those of you who are not familiar with ESS Tuning, we have been making some of the worlds finest superchargers for BMW, Lamborghini, Mercedes, and Audi for over 20 years! The same passion and craftsmanship that goes into every one of those kits, continues into our domestic supercharger line as well.

On top of that offer, we are doing something else that is absolutely unheard of in the industry. We are SO confident in our product, we are offering a 30 day money back guarantee on these systems. In other words, you can purchase the kit, install it, drive it for a bit, and send it back for a full refund if you aren't happy with it! (some restrictions apply).


Product Description

With over 22 years of producing and tuning state-of-the-art supercharger systems for a variety of platforms, ESS knows a thing or two about forced induction system design and integration. We've now taken our expertise into the American domestic market by designing a complete bolt-on supercharger system for the 5th generation Camaro SS that puts out a monstrous 600WHP/550WTQ on a stock LS3.
This system uses the renowned Vortech V3Si supercharger for proven performance and unparalleled reliability. A massive air to air intercooler keeps temperatures down while an innovative reverse-tension belt-drive system ensure optimal belt grip even during extreme racing conditions for extended periods. All of this comes along with an extremely robust, industry-leading bracket design, a complete fuel system including the latest generation Siemens Deka 880cc direct fit fuel injectors for unmatched overall performance and drivability, and a complete installation kit with all the hoses and hardware you'll need makes it the best complete kit on the market today.
If that's not enough, the supercharger system was designed to support a Vortech V7YSi supercharger that can be swapped straight in for power potential up to 1400HP with supporting engine and fuel system upgrades. The main bracket system, belt-drive system and intercooler/SC induction system were designed with extreme power in mind straight out of the box.
Features:
  • V-3 Si Vortech Supercharger
  • Massive Air to Air Intercooler (40x18x8)
  • 10-Rib Reverse Tension Belt-drive System
  • (3) 10-Rib Idler Pulleys Made from Hard Anodized 6061-T6 Aluminum.
  • 105mm LS3 Supercharger Pulley Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish
  • 200mm ESS Crank Pulley Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish
  • Fluidampr Harmonic Balancer
  • Upgraded Fuel System (Latest Generation Siemens Deka 880cc Injectors, ZL1 Fuel Pump, and Custom Fuel Pump Controller)
  • HP Tuners nGauge Software Upload and Diagnostic Tool w/Perfectly Matched ESS ECU Software.
  • K&N High-Flow Air Filter
  • Vortech MaxFlow Bypass Valve
  • Innovative Reverse Tensioning Belt System
  • CNC'd Industry-leading Robust Bracket Design Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish
  • LS3 Crank Pin Kit Gen III
  • PCV 1-Way Valve System
  • CCV Kit
  • Complete Form Fit Silicone Intercooler Hoses Throughout.
  • Complete Hardware Installation Kit (w/all necessary bolts, spacers, and nuts)
  • ESS Custom Windshield Wiper Washer Fluid Reservoir and Relocation Kit.
Additional Information:
This kit is completely bolt-on and requires no custom fabrication. Comes with a custom windshield wiper fluid reservoir which allows you to maintain that functionality instead of completely removing it. Also, the kit comes with bracket adapters and all necessary hardware which allows for easy swapping between all 5th Gen model years (10-15).
Install Time: 10-14 hours with new fuel pump installation; 8-10 hours without fuel pump installation.

http://cdn3.bigcommerce.com/s-00nxb6...0.1280.jpg?c=2
http://cdn3.bigcommerce.com/s-00nxb6...0.1280.jpg?c=2
http://cdn3.bigcommerce.com/s-00nxb6...0.1280.jpg?c=2
http://cdn3.bigcommerce.com/s-00nxb6...0.1280.jpg?c=2
http://cdn3.bigcommerce.com/s-00nxb6...0.1280.jpg?c=2
http://cdn3.bigcommerce.com/s-00nxb6...0.1280.jpg?c=2
http://cdn3.bigcommerce.com/s-00nxb6...0.1280.jpg?c=2

bandier 01-03-2018 04:56 PM

Nice deal!!!

Ralph@ESSTuning 01-03-2018 04:57 PM

Quote:

Originally Posted by bandier (Post 10030544)
Nice deal!!!

Tell your friends :D

Hixson 01-04-2018 08:30 AM

Killer deal - would have probably bit on this earlier this winter before I spent $5K on a full cam kit, headers, tune, tires, etc. Who knows maybe something like this will be around for next years budget :)

GL to everyone who jumps on this - lucky bastards

hammdo 01-04-2018 12:33 PM

Welcome to the forum! Looks like a nice kit.. hope you’ll be able to make CFest in Bowing Green!

-Don

Ralph@ESSTuning 01-04-2018 12:41 PM

Quote:

Originally Posted by hammdo (Post 10031341)
Welcome to the forum! Looks like a nice kit.. hope you’ll be able to make CFest in Bowing Green!

-Don

Thanks Don. I appreciate the kind words.

bct10985 01-04-2018 07:08 PM

10 rib belt is nice, especially if you step up to the ysi.

JANNETTYRACING 01-05-2018 07:52 AM

Welcome to the forum

QUICRNU 01-05-2018 09:00 AM

Looks Nice and Welcome!

Any pics of it in the car?

Jayjellyfish212 01-05-2018 12:28 PM

Quote:

Originally Posted by QUICRNU (Post 10032133)
Looks Nice and Welcome!

Any pics of it in the car?

I was looking forward to seeing installed pics too

Ralph@ESSTuning 01-05-2018 12:46 PM

Quote:

Originally Posted by QUICRNU (Post 10032133)
Looks Nice and Welcome!

Any pics of it in the car?

Quote:

Originally Posted by Jayjellyfish212 (Post 10032341)
I was looking forward to seeing installed pics too

Im getting some rounded up for you guys at the moment. I should hopefully post some later on today.

Thanks for the interest.

Ralph@ESSTuning 01-08-2018 10:49 AM

All PM's replied to. Still 3 systems left at this time. Install photos are on the way, as well.

Ralph@ESSTuning 01-08-2018 04:40 PM

https://preview.ibb.co/c0JwGm/DSC07979.jpg

https://preview.ibb.co/n8s6Gm/DSC08114.jpg

QUICRNU 01-08-2018 06:33 PM

Looks nice.


All times are GMT -5. The time now is 09:51 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.