Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- Suspension / Brakes / Chassis (https://www.camaro5.com/forums/forumdisplay.php?f=93)

- - Bleeding Camaro Brakes (https://www.camaro5.com/forums/showthread.php?t=104966)

Merc	09-09-2010 09:11 AM

Bleeding Camaro Brakes

Will be installing a TCI line lock tomorrow. Looking for some advice on correct bleeding proceedure.:iono:

usmc8411

09-09-2010 09:23 AM

Fill brake fluid.
Pump the shit out of brakes.
Hold brake pedal down..wife comes in handy.
Crack passenger side bleeder...listen for queef noises.
Close bleeder before pedal goes all the way down.
Pump brakes.
Crack bleeder again. When you have steady brake fluid coming out its good to go. Just make sure to tighten it before the pedal is all the way down.

Check brake fluid level.

Repeat for driver side.

Check brake fluid level.

Some people stick a tube over the bleeder to avoid messes.

Kwik	09-09-2010 11:02 AM

DO NOT let the master cylinder go dry.

Merc	09-09-2010 11:30 AM

Quote:

Originally Posted by Kwik (Post 2312669)

DO NOT let the master cylinder go dry.

Roger That! THX:thumbsup:

All times are GMT -5. The time now is 10:41 AM.