Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)

- Engine | Exhaust | Bolt-On | Drivetrain Modifications (https://www.camaro5.com/forums/forumdisplay.php?f=145)

- - Metco pulley kit (https://www.camaro5.com/forums/showthread.php?t=549867)

Bramirez1

03-13-2019 05:52 PM

Metco pulley kit

Has anyone purchased the Metco pulley kit and if so how is it and is it easy to install? Trying to purchase for my ZL1.

d454brisson

03-13-2019 11:05 PM

I had a metco hub and pulley kit but wouldnt do it again. I wanted stock look with the ability to change sizes but the first time I swapped them the threads on most of the holes stripped. The Flange is too thin. I also got lucky and my pulley removed the stripped hub without having to cut it.

I went with a lingefelter hub and haven't had any issues. Its much thicker and more stout. There may be some metco pictures on here from the past.

All times are GMT -5. The time now is 06:24 AM.