Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro DIY & HOW-TO instructions & discussions (https://www.camaro5.com/forums/forumdisplay.php?f=67)
-   -   WANTED: How to Remove Grille (https://www.camaro5.com/forums/showthread.php?t=59216)

The_Blur 01-04-2010 03:14 PM

WANTED: How to Remove Grille
 
A lot of people are buying aftermarket grilles. Some are hesitating because they don't like the look of the grille with another grille in the background.

This is a very good point. The only extra grille you should have are the one in your backyard.

We need an instructional guide to removing the OEM grille. Get posting. :popcorn:

bng804 01-04-2010 03:29 PM

You will have to you will have to completely remove the front fascia to get at the grill. Removing the grill is easy once ya get the fascia off. This is a copy/paste from elsewhere I stuck in my notes for when the heritage grill eventually makes it's way to me :paddle:


http://www.sfxperformance.com/images...W-SPLITTER.jpg



http://img407.imageshack.us/img407/918/2146809.th.gif


Fascia Removal

Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement

1


Front Bumper Fascia Upper Support Push-In Retainer (Qty: 6)

2


Front Fender Support Bracket Screw (Qty: 2)

Tighten
7 N·m (62 lb in)

3


Front Bumper Fascia Outer Bracket Nut (Qty: 6)

Tighten
7 N·m (62 lb in)

4


Front Bumper Fascia Bolt (Qty: 2)

Tighten
3 N·m (27 lb in)

5


Front Bumper Fascia Lower Bolt (Qty: 2)

Tighten
7 N·m (62 lb in)

6


Front Bumper Fascia Lower Screw (Qty: 2)

Tighten
7 N·m (62 lb in)

7


Front Bumper Fascia Lower Retainer (Qty: 6)

8


Grill Removal

Disconnect the main electrical connector.


http://img194.imageshack.us/img194/4370/2183107.th.gif



1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement(see procedure above)
2. Remove the front bumper energy absorber.
3. Place the bumper fascia face down on a clean protected surface.
4. Release the grille tabs securing the center grille to the front bumper fascia.



Tip
Each individual front bumper fascia tab must be secure to each slot in the center grille prior to re-assemble of the fascia to the vehicle.

2SSRS@Gen5diy 01-04-2010 09:45 PM

1 Attachment(s)
Its in the PDF from Gm on how to install the GFX, Here you go.

The_Blur 01-04-2010 09:51 PM

These are great responses. :thumbsup: I appreciate the help, and I'm sure a long list of other Camaro5 members agree.

Now, this brings me to my next question.


All times are GMT -5. The time now is 08:54 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.