Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - (
-   Forced Induction (
-   -   FS LS3 Eforce kit, BTR Stage 3, Kooks, AFCO, ZL1 pump ID850s and Rotofab.. 50% off (

Rumbumbees$ponsor 02-03-2015 02:42 PM

FS LS3 Eforce kit, BTR Stage 3, Kooks, AFCO, ZL1 pump ID850s and Rotofab.. 50% off
2 Attachment(s)
Wanting to upgrade to ERL block and AGP kit.

SC is kit for LS3 (only difference is the valley plate and you get 1 pulley smaller than the M6 kit) which is in kit all ready. Valley plate available at Elderbrock dist like jegs/summit.

The blower is perfect condition. It had a small snout leak/vacuum leak and a new snout was put on under warranty and since they had it they changed all bearings and the fluid for free I didn't even ask Frankly I think they just used a new unit and put my old lid back on since mine was painted. Eldebrock has the best warranty I ever saw. It even had a smaller pulley and they didn't even say a thing. I maybe have 1000 miles on it since its been back.

Other than that, I painted by hand the elderbrock and silver part which you can paint over with your cars color or sand off.. See pick. If you have rally yellow even better!

It will come with a pulley mounted that is 2 sizes lower than stock. I also have 1 size smaller than stock that I'll throw in. There is one more smaller available to purchase for more boost or you can trade or buy for $35.00 from someone for a stock if you just want stock 7psi.

0 Stock - 6/7psi Not Included
1 size smaller Spare Included
2 Sizes smaller than stock Included (Mounted)
3 Sizes smaller than Stock Not included

The rotor fab is included cause I can't use it now when I go to AGP and I can not locate the original intake that came with the eforce.

The Kooks are included too.. Can't use them on the AGP kit as well! They are the 1300 coated ones the hiflo cats where gutted cause I went over 550 RWHP. There coated to. Still look pretty good they been on since fathers day 2014 since they were a present

I would like to have your manifold and valley plate in exchange since I don't have one and need one for the AGP kit. The belt on the blower is less than 1000 miles and I have a new one that fits the other pulley.

I need $5100.00 no games.. no barging I listed my lowest price!

There is not one thing wrong you want to come down to Texas and Drive it before its removed Cmon !

Eforce kit new $6000.00
ID850 $900.00
Rotofab New $ Mine 525.00 special paint yellow elbows
Kooks Coated inside out with Hiflo Cats 1300 plus new clamps and gaskets included!
AFCO dual Pass Heat Exchanger 795.00 NIB
ZL1 Pump $300
BTR Cam 369.00

ZL1 pump with less than 2000 miles on it.. All you need is a Boosta pump or the ADM module. If you use the stock pulley the Factory Pump is fine, If you use 1 size smaller a ZL1 pump is needed, If you use the 2 pulleys down (that's the pulley on blower) the ADM module is needed or a Boosta pump will be needed.

So with tax and ship originally paid over $10,000.00

$5100 plus ship.. If you want to see a dyno you can go to Hp motorsports on FB @

Scroll down to November 17th 2014 to watch the yellow bumble make 625 RWHP on mustang dyno! 647 on a dynojet

call or text me @817 586 6796 or

if ya pm me I take longer to get back to ya..

TurboNarwhal 02-03-2015 06:23 PM

You willing to split this up and sell anything separate? I might be interested if you do.

1sick_eg 02-03-2015 07:10 PM

Man, if you had this a few days ago I would have bought it for sure. Awesome price. Should go quick. I just dumped a bunch of money on a different cam setup and heads. What does the edelbrock blower look like under the cover?

Rumbumbees$ponsor 02-04-2015 07:49 AM

Thanks Sick!

Yes willing to split but the eforce has to go with rotofab I can't find the eforce greyish elbow or special filter box that cam with kit. You can repaint box very easy! and jennifer at rotorfab can get you silicone of your choice for the couplers and new decal. I do have a red decal the says rotor fab.

kit no IDS850 3500.00
kit w IDS850 4500.00
kooks 700.00

Remember that I also need you stock intake plastic manifold for the dealer didn't give mine back when they installed mine.

Rumbumbees$ponsor 02-04-2015 08:00 AM

Just included in the package the AFCO!

Tricksta 02-09-2015 09:00 AM

Any video clips of how the car sounds inside/outside of it, any gas smell running gutted cats?

Rumbumbees$ponsor 02-09-2015 09:49 AM

Ya I posted the face book page scroll down the site you will see the yellow bee video on the dyno!

No fumes it running with in 3% in all tables I have friends that are N/A I can definitely smell fumes in there and theirs tends to back pop or mini back fire from unburned gas on the decel.

Tricksta 02-09-2015 11:35 AM

I'll have to check in a few hours when I'm off work.

Sent from my Samsung Galaxy S4 using Tapatalk

Rumbumbees$ponsor 02-09-2015 12:15 PM

No problem

Tricksta 02-09-2015 07:11 PM

Price on the kooks and gutted cats?

Rumbumbees$ponsor 02-09-2015 10:06 PM

650 plus ship ceramic coated in and out.. new clamps and gaskets

Tricksta 02-09-2015 10:32 PM


Originally Posted by Rumbumbees$ponsor (Post 8223351)
650 plus ship ceramic coated in and out.. new clamps and gaskets

can you snag me a shipping price to 45856, the o2 extensions come with?

Sent from my Samsung Galaxy S4 using Tapatalk

Rumbumbees$ponsor 02-10-2015 09:00 AM

Yes all that comes with it.. I will use a Freight carrier. They call you and take pick up truck down there. I will put blower and parts on a pallet wrapped and protected very good.. can even build a cover so no damage occurs.

Shipping is 125.00 Carrier maybe AAA cooper, Old Dominion, South Eastern.. All depends what closer to your Zip.

Rumbumbees$ponsor 02-10-2015 09:04 AM

Someone needed a video to make sure it works.. Had wifey start it last night Forgot to put covers for I don't use them unless we go to show the car...

All times are GMT -5. The time now is 10:02 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.