Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   1st & 2nd Generation Camaros (https://www.camaro5.com/forums/forumdisplay.php?f=32)
-   -   1967 Camaro Turbo Build (https://www.camaro5.com/forums/showthread.php?t=526962)

Pro Stock John 04-23-2018 05:26 PM

1967 Camaro Turbo Build
 
Some pics from my build thread on LS1Tech:

Started out as as a 502 BBC / 8-71 pro street car:
https://cimg7.ibsrv.net/gimg/ls1tech...db55841c05.jpg

Sold motor and blower as was the plan:
https://cimg4.ibsrv.net/gimg/ls1tech...131e773368.jpg

Has 15x14's on it:
https://cimg3.ibsrv.net/gimg/ls1tech...3a3646128d.jpg

Pro Stock John 04-23-2018 05:30 PM

Took it over to my buddy's shop (Manna Motorsports, Schiller Park IL by O'Hare Airport)...

https://cimg1.ibsrv.net/gimg/ls1tech...3c81cb5b7c.png

Major progress:
https://cimg8.ibsrv.net/gimg/ls1tech...bf3ff874ba.jpg

https://cimg6.ibsrv.net/gimg/ls1tech...61ab586a5e.jpg

https://cimg0.ibsrv.net/gimg/ls1tech...185f5e238e.jpg

Phase 1 complete.

Onto to Phase 2 (wiring).

Then Phase 3 (brakes, fuel system, start up).

Bandit63 04-23-2018 08:00 PM

Looking good

2thousand2 04-24-2018 09:51 AM

Nice!!

PROZ11 04-24-2018 10:08 AM

Lookin' good..

That thing must have been scary with that 871 blown big block and manual drum brakes.. Yikes. Phase 3 needed for sure. I do like the purple drums though.. LOL.
.

Pro Stock John 04-24-2018 05:00 PM

To be honest, this car didn't have enough fuel system to make big power with the blower, a single Holley pump. But the guy who briefly owned it before me said it was hard to stop it on the street.

Car has a purple theme in addition to the yellow, I had to repaint the roll bar. The 9" is purple too lol.

Getting Strange brakes front and rear.

I might keep it on big tires. I see you have a prostreet car too.

PROZ11 04-24-2018 08:52 PM

That things looks like it's gonna be a beast when it's done. Mine's a little more old school, traditional ProStreet. I did have thoughts about doing a turbo or pro charged LS in mine at one time a few years back.

.

Pro Stock John 04-25-2018 07:08 AM

This '67 was as well, I thought it would make a good platform for a 7.99 car.

https://scontent.ford1-1.fna.fbcdn.n...e5&oe=5B9C95F2

SSEssence 04-25-2018 09:15 AM

Beautiful build man!!

PROZ11 04-25-2018 12:23 PM

Quote:

Originally Posted by Pro Stock John (Post 10161640)
This '67 was as well, I thought it would make a good platform for a 7.99 car.

.

:w00t:, 7.99, nice. Are you keeping it strictly a track car or will it see some street use? Mine's pretty much a street car. All steel with a full interior. I take it to cruise nights and shows a few times a month with the occasional weekend cruise and I drive to work every once and a while. I'm pretty sure I'd break some parts at the track with sticky tires and the T56. Likely the T56..LOL:smiling1:.

.

Pro Stock John 05-25-2018 08:20 PM

Street and strip...

https://scontent.ford1-1.fna.fbcdn.n...79&oe=5BC50F7E


All times are GMT -5. The time now is 04:05 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.