Inferno Diablo [COTW 11/24/13]
 

In less than 2 years I transformed my IOM Camaro from bone stock to a truly head turning machine !! once I finished with it I sold it and moved on to my next project, a white turbocharged SS which I also plan on finishing in about 2 years but I plan on keeping this Camaro for good. My ducati 1198s is my other baby , I also transformed it from bone stock to a piece of art and plan on keeping it forever :thumbup:

Diablo Archangel - Current mods to date (work in progress!):




Power-train & Computer modifications:

• Turbonetics Single 76mm Turbocharger (w/ 60lb/hr Injectors) @ 10.6psi, & 7# wastegate springs
• Custom Dynotune using SCT software (Tune by Lance Keck, used and rented Creations N' Chrome Dynojet dynomometer)
• Magnaflow 3" Catback with Polished SR 5" double walled, straight cut, rolled tips, with custom axel-back portion using Center/Offset 3" Universal Magnaflow Mufflers
• RX Products Summit White Catch can & breather kit
• VMAX CNC Ported Throttle Body and painted Summit White
• ADM Twin Fuel Pump System
• Granatelli Motorsports (GMS) Red High Temperature Spark Plug Wires
• Red High Temperature Thermal Heat Shield Protection Spark Plug Wire Boots/Sleeves
• FilterMag (SS-300) oil filter magnet
• Fumoto Quickvalve (F107SW) oil drain valve

Interior (Appearance included) Modifications:

• AutoMeter Dual-pod Pillar
• AEM TruBoost digital/electronic boost controller
• AEM Digital Fuel Pressure gauge
• White Carbon Fiber Door Panels and Dash Trim
• White leather arm rest
• Ultra-gauge multi- purpose performance gauge
• Summit White Painted A/C and Radio Knobs
• Summit White Painted Instrument cluster bezel
• Summit White Painted Steering wheel trim
• Summit White Painted Shifter bezel with red pinstriping
• Smoothed and painted Gloss Black Center Console
• Smoothed and painted Summit White Center Console long trim (aka kick panels) panels with red pinstriping
• Hexis 30000 Black Carbon Fiber Vinyl wrapped sun visors with custom Turbo airbag warning stickers
• Factory Hurst Short Throw Shifter
• White Rally Stripes Shift Knob
• SRP Racing Pedals- black with silver rivets
• Heads-up Display (HUD) installed
• EmblemPros Rear Cup Holder Delete Lighted Switchplate (custom labeled and allows me to activate/deactivate certain LED's around the vehicle)
• McNord Custom White Carbon Speedometer and Tachometer Gauge Faces (Turbo pic, SS emblem, Chevy bow-tie, and custom text)

Exterior Appearance Modifications:

• Custom ZL1 Upper Grille
• Stillen side-skirts
• Stillen rear spats
• Vertical Doors
• 20" TSW Nurburgring Rotary Forged Lightweight Wheels 20"x 9" Front/20"x10" Rear Powdercoated Gloss Black w/Red Pinstripe using a Beugler Pinstriping Tool with 1-Shot "Bright Red" paint.
• Rear custom spoiler painted Summit White
• AMS Carbon Fiber vented hood w/custom paint (hood spears left in carbon fiber, and clearcoated and red pinstriped hood spears)
• AAC Plasma Tail-light Afterburners
• AAC/Oracle LED Concept Side-Markers painted Summit White
• AAC/Oracle Custom Retrofitted Projector HID Headlights w/6K bulbs, satin black painted housing, and Colorshift 2.0 Halos with remote control
• AAC/Oracle LED Switchback Turn Signal/Day time running lights
• AAC/Oracle Six 36" Colorshfit LED Strips (two each under side of the car, two for the front grills, two for engine bay)
• AAC/OracleSix 15" Colorshift LED Strips (two for engine cover, two for the front fender vents, and two for the footwell lighting)
• AAC/Oracle Colorshift Rear Chevy LED Bowtie
• Red and Black Carbon Fiber Inner Rear Chevy Bowtie with Matte Black Outer
• 3D Carbon Front Fender Vents
• 3D Gill Decals
• CBD Carbon Fiber Radiator Cover
• CBD Carbon Fiber Fuse Box Cover
• Custom Carbon Fiber XM Antenna
• G2 White Brake Caliper Paint (with Brembo High Temp decals)
• TrimWorks Black Carbon Fiber Vinyl Wrapped Roof Molding
• Gloss Black Painted Tail-light bezels
• Hexis 30000 Black Carbon Fiber Vinyl wrapped custom side mirror design, and side mirror bezels
• JWM License Plate White LED's
• Headlight Armour Headlight shield and turn signal shield protection kit
• MNP Customs Rear Fascia Vinyl Black-out in "Gloss Black"
• Custom cut Front Fascia Gloss Blackout using Hexis 30000 vinyl and red pinstriping.
• Custom cut Lower Fascia Gloss Blackout using Hexis 30000 vinyl and red pinstriping
• Custom cut Hash Marks using Hexis 30000 vinyl and red pinstriping.
• Gloss Black Vinyl Wrapped Roof 3M 1080 vinyl
• Summit White/Black Painted Engine Cover w/ custom mesh cutouts and colorshift (RGB) lighting.
• GM Black SS Valve Stem Caps w/ White SS Logo.
• Matte Black Mailslot
• Matte Black Stillen Side Skirt "Air Ducts"
• 3M Scotchtal Red Vinyl Pinstriping on the hash marks, front fascia, and rear fascia
• AC Delco Locking Gas Cap (coded to use the car key)

Suspension Modifications:

• Pedders Subframe Bushing Inserts
• Momentum Autosports Tunnel Brace

wheels
 

goodbye stock wheels ....... hello custom foose wheels :cool:

looking awesome

more horses
 

- Injen Intake
- Magnaflow cat-back ( must say WOW !!!!!!!!!!! this thing sounds like a beast, I love it !!!! ) :happyanim:

Wow! Your car is looking great! What happen to your old black one? I know you got the orange one because the black one was a lemon.. but whats going to happen to the black one now?

nice

thanks
 

Thanks brother, the black one is at the dealership , I guess they are using it as a testing model ........ dont know and dont wanna know haha that car was such a pain in the ass :thumbdown:

Hey dude, did I see you getting off the Williamsburg bridge into Manhattan this past weekend around 10:30 pm?? If not, it was an RS with VERY similar mods.

painted
 

painted all the calipers and centers in gloss black , got tired of seeing that grey/primer look alike centers and silver calipers :thumbdown:

finally !!!!!!!
 

Alright ladies and gents !!! finally I finished the wheels painting all the rivots IOM :headbang: ............ here it is ....... I personally love it !! hope others do too :drool:

how dark of a tint did you go on the back up lights and side markers? And much darker is it at night with them on now?

:thumbup: I love that frame. I plan to do something very very similar. Looks great man. How do you find the time? Good looking ride all the way around. :w00t:

...
 

I tinted them "charcoal" which is the darkest possible, and yes light goes trough just fine :thumbup:

Ha thanks brother, you should make it to the next meet so you can see my new whip in person :headbang: and about the time ........ hmmmm just push laundry and errands and everything else until last minute lol CAMARO COMES FIRST :happyanim: