Oil pan removal using engine hoist...
Hi,
During my cam swap, I plan on using an engine hoist to lift the engine so I can remove the oil pan (putting in baffles).. Assuming the car is on jack stands and the heads are off, is there enough clearance before I hit the firewall to remove the oil pan or do I still need to drop the cradle? Thanks |
i would say no.i cut and welded flanges,so now i can unbolt my cross member.there isnt much room to lift the engine at all.maybe someone will chime in that has other ideas.
|
Never gonna happen with the trans connected. Your best bet is the crossmember mod...
|
As much as id love to do the flange mod, I don’t want to go that route. I don’t plan on doing this again. I’m getting too old for this LOL.
|
All times are GMT -5. The time now is 02:13 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.