Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   USA - Florida (https://www.camaro5.com/forums/forumdisplay.php?f=140)
-   -   NEW! BMR Rear Lower Control Arms for lowered 5th gens! (https://www.camaro5.com/forums/showthread.php?t=190527)

Erik@lashway 12-23-2011 06:59 AM

NEW! BMR Rear Lower Control Arms for lowered 5th gens!
 
Hot off the press and ready for shipment to your door!

Check them out on our site here:

http://www.lashwaymotorsports.com/bm...trol-arms.html

Correct lost camber adjustability, reduce suspension deflection, and increase rear cornering stability with a set of Lower Control Arms from BMR Suspension. Superior to the factory stamped steel arm, the BMR Control Arms are constructed from heavy duty 2 square tubing and internally-gusseted laser-cut mounting plates. The BMR Lower Control Arms (TCA028) feature low-deflection polyurethane bushings, reinforced sway bar mounts, and a shortened overall length to correct camber on lowered vehicles. Installation time is only 3-4 hours. Available in black hammertone or red powdercoat.

Notes :
Designed for lowered vehicles only. Use on OE height vehicles may not provide adequate camber adjustability.
Due to shortened length of these control arms, adjustable toe rods are necesarry when using this product.
When using on 2012 models it is necessary to use a 2010/2011 style rear sway bar and end links.

Features :
Pre-shortened to provide camber correction on lowered vehicles.
Greasable, low deflection internally fluted polyurethane bushings
Heavy duty 1/4" Sway bar end link mount
Internally gusseted outer mount and heavy duty 2" boxed steel construction
Clears 17" Weld Wheels
Fits most wheels 18" or larger
Lower "window" provides adjustable coil-over valving accessibility


All times are GMT -5. The time now is 01:07 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.