Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro Issues / Problems | Warranty Discussions | TSB and Recalls (https://www.camaro5.com/forums/forumdisplay.php?f=70)
-   -   Service Stabiltrac Light on and Brakes grind while turning. (https://www.camaro5.com/forums/showthread.php?t=547130)

Tylerscully 01-28-2019 11:42 PM

Service Stabiltrac Light on and Brakes grind while turning.
 
When i turn the car on everything is fine but once I move the car forward an inch I get the service stabilitrak message that stays on with the traction control, stabilitrak, and competitive mode lights. They all stay on and the button on the center console doesn't work while these lights are on. Also while I drive if i turn my wheel more then 90 degrees in either direction while braking my brakes grind and the car DOES NOT STOP. I have to turn the wheel straight to stop. I have almost crashed at least 5 times. I am extremely scared to bring my car to the track (don't worry I will not be bringing it). But seriously tho why lol. I have a ton of mods done to the car but idk whats going on still.

camguynj 01-29-2019 04:43 AM

Any CEL or codes?

HyperV117 01-29-2019 10:49 AM

If your brakes are grinding I would check to make sure you still have pad surface on them. Even if the system is engaging them for whatever reason they shouldn't be grinding.

Tylerscully 01-29-2019 09:18 PM

Quote:

Originally Posted by camguynj (Post 10423175)
Any CEL or codes?

Nope only service stabiltrak on the dash

Tylerscully 01-29-2019 09:19 PM

Quote:

Originally Posted by HyperV117 (Post 10423387)
If your brakes are grinding I would check to make sure you still have pad surface on them. Even if the system is engaging them for whatever reason they shouldn't be grinding.

My brakes r brand new

HOJO 01-29-2019 10:01 PM

So your losing all braking capabilities when you turn your wheel 90 degrees? Does ABS activate? Do you lose pedal? You are losing something if braking fails.

HyperV117 01-30-2019 10:28 AM

Can you tell what corner the grinding is coming from?

edit: Brakes aren't supposed to grind. If you just had them installed I would double check them. Perhaps they were installed improperly.

Tylerscully 01-31-2019 12:35 AM

Quote:

Originally Posted by HOJO (Post 10424050)
So your losing all braking capabilities when you turn your wheel 90 degrees? Does ABS activate? Do you lose pedal? You are losing something if braking fails.

When i turn the steering wheel and press the brakes the brake pedal doesnt go more then 5% down and it just grinds. But if i pump the brakes it will eventually go. abs doesnt activate

Tylerscully 01-31-2019 12:37 AM

Quote:

Originally Posted by HyperV117 (Post 10424340)
Can you tell what corner the grinding is coming from?

edit: Brakes aren't supposed to grind. If you just had them installed I would double check them. Perhaps they were installed improperly.

I cannot tell what side they are grinding from, and I checked the brakes 100 times to see if they were installed correctly, they surely are lol.

camguynj 01-31-2019 06:59 AM

Quote:

Originally Posted by Tylerscully (Post 10424981)
I cannot tell what side they are grinding from, and I checked the brakes 100 times to see if they were installed correctly, they surely are lol.

Suggestion... roll down both windows and have someone ride with you and listen to hear what side the noise is coming from or both sides.

gtstorey 01-31-2019 09:45 AM

Grinding or squealing?

Tylerscully 01-31-2019 04:10 PM

Quote:

Originally Posted by camguynj (Post 10425061)
Suggestion... roll down both windows and have someone ride with you and listen to hear what side the noise is coming from or both sides.

Ok

Tylerscully 01-31-2019 04:14 PM

Quote:

Originally Posted by gtstorey (Post 10425186)
Grinding or squealing?

Grinding

Tylerscully 01-31-2019 04:16 PM

I may have found the reason for the stabiltrak BS. Chevy said the light might come on If I have after market wheels. I am running 305/30/19 all around lol. I'm gonna throw my stock wheels back on and see what hapoens.


All times are GMT -5. The time now is 10:56 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.