Modern07 - 2013 Summit White ZL1 [COTW 6/9/14]
http://i265.photobucket.com/albums/i...ps911ee763.jpg
http://i265.photobucket.com/albums/i...pse918763b.jpg Latest Photos and Mod List http://img.tapatalk.com/d/14/01/24/9e9ejagu.jpg http://img.tapatalk.com/d/14/02/15/epasuge7.jpg http://img.tapatalk.com/d/14/01/19/y4y5u8az.jpg http://i265.photobucket.com/albums/i...ps40f687b8.jpg http://i265.photobucket.com/albums/i...pse6e03d9f.jpg http://i265.photobucket.com/albums/i...psfe0cb204.jpg http://i265.photobucket.com/albums/i...psdbcf109f.jpg Current List of Mods Performance Pfadt Tri-Y Stainless Steel Headers w/ Ceramic Black Coating Rotofab CAI w/ Summit White Painted Airbox and Carbon Fiber Finish MAF Housing LPE 2.55" 10 Bolt 8 Rib Supercharger Pulley Heavy Duty Solid Isolator Coupling Gates 65.3" Supercharger Belt - Green Stripe HD SLP 160 Degree Thermostat ATI ZL1 Super Damper Kit - Includes Serpentine 8 Rib Belt - Includes 10% OD Balancer Pulley Injector Dynamics ID850 Injectors VMax LS3 90mm Ported TB Alky Control FSP Style Methanol Injection Kit Ron Davis ZL1 Heat Exchanger D3PE Coolant Reservoir Hawk Ceramic Brake Pads Mike Norris Billet Catch Can with Black Finish FSP ZLx Blower Cam Hardened Chromemoly Pushrod Set BTR Dual Valvespring Kit .650" Lift (Titanium Retainers, Viton Valve Seals, Steel Spring Seats) GM Gasket Kit (Front Timing Cover Seal/Gasket, Waterpump Gasket, Balancer Bolt) Melling Select Oil Pump 10296 C5R Timing Chain ECS Fuel Pump Voltage Booster w/ Hobbs Switch Kit Corsa ZL1 3" Catback Exhaust with X-Pipe & Quad 4" Pro Series Tips BMR Rear Trailing Arms, Polyurethane Bushings BMR Bushing Kit for Rear Trailing Arms BMR Rear Toe Rods, Non-Adjustable, Polyurethane Bushings Monster LT1-SC Twin-Disc Clutch rated to 1000HP Custom Dyno Tune by Matt @ FSP Cosmetic Custom Painted LSA Engine Cover Custom Painted Fusebox with GM Performance Division Emblem from EmblemPros in Black & White Custom Painted ZL1 Strut Brace with ZL1 painted logo in Carbon Flash Metallic & Candy Electric Blue Front & Rear Painted Bowties Showstopper LED Sidemarkers with Tint Technostalgia LED Sequential Taillights Plasma LED DRLs in Xenon White ZL1 Embroidered Floormats ZL1 Embroidered Center Console Lid ZL1 Underhood Logo Custom Airbrushed by Chris Cruz Artistry LED Interior Lighting Kit in Blue including Footwell Lighting Summit White ZL1 License Plate Frame Flat Black Painted Taillight Bezels Xenon White LED License Plate Lights Custom Black & White 10mm Engine Bay Bolts Billet Underhood Cap Covers Black & White Camaro Dipstick ZL1 Embossed Radiator Shroud from EmblemPros ZL1 Embossed Summit White Strut Covers Summit White Trunk Panel with ZL1 Logo Xenon White LED Trunk Light Showstopper Underhood Cover Kit in White/Carbon Fiber Finish Custom Painted White Strut Brace Bolts Billet Custom Wire Harness Cover in White with Bowtie Logo Billet Custom Hood Strut in White Blue LED Underhood lighting wired to Switch on Fusebox CF Vinyl on Steering Wheel Bowtie StealthBulbs Turn Signals Billet Custom Interior Kit Hydro-dipped Carbon Fiber by AquaDip Graphix Hydro-dipped Carbon Fiber ZL1 Water Tray by Aquadip Graphix NightOwl RGB Halo Kit NightOwl Radiator Grill RGB Lighting Kit H11 ZL1 6000k Foglight Bulbs Flat Black "SSX" Style Front Bumper Blackout Billet Custom Speaker Surrounds Hydro-dipped Carbon Fiber by Aquadip Graphix Custom Painted ZL1 Emblems with Carbon Flash Metallic and Candy Electric Blue Paint Custom Painted Camaro Fender Emblems with Carbon Flash Metallic Paint Custom Painted Wheel Center Caps in Satin Black with White Bowtie Other Valentine 1 Radar Detector Hardwired to OnStar Mirror 2 x Aeroforce Interceptor Gauges with ZL1 Custom Faceplates Bosch AFR Wideband Sensor Wired to Aeroforce Gauges Autometer Dual Gauge Pod with Alky Control Methanol Warning Lights - Flocked in Gray to Match Interior Suede Mild to Wild Exhaust Controller DRL & Foglight Harness Coming Soon Front and Rear ZL1 Brembo's Powdercoated "Intense Blue" Currently at 701 RWHP and 670 RWTQ :bellyroll: :wub: http://img.tapatalk.com/d/14/03/25/umuzapev.jpg --------------------------------------------------------- So I figured it was time for me to create a build thread as I've had my 2013 Summit White ZL1 for a few months now and have started to make her my own. At the current time it is mostly cosmetic mods, but the performance mods will come! :headbang: :D So anyway, before the ZL1 I was driving a 2011 2SS/RS which I had owned since new and absolutely loved: http://i265.photobucket.com/albums/i...pscffbfe49.jpg As soon as I heard about the ZL1 though I knew I had to have it, and I placed my order on the 1st May 2013 and patiently waited whilst playing the allocation game - the call I'd been waiting for came 5 months later on 10/10/12: http://i265.photobucket.com/albums/i...psc0fe595d.jpg I couldn't get down to the dealership on the 10th, and so I finally took delivery on 10/11/12 - a date that's easy to remember but that I would never have forgotten anyway!! :thumbup: Here's the 2 of them together before I made the trade... http://i265.photobucket.com/albums/i...ps69a58d8a.jpg http://i265.photobucket.com/albums/i...psf333b826.jpg Obviously the 5 months of waiting had given me plenty of time to think about the mods I was going to make, and I decided early on that I would try to keep the warranty for as long as I could - as such the mod's I planned out to start with were cosmetic. One of the things I didn't overly like about the ZL1 was the engine bay...I just felt like it didn't really pop the way it should, or match the Summit White car.. http://i265.photobucket.com/albums/i...ps52376267.jpg So my plan from day 1 was to add my own touch to the engine bay...starting with a decal for the ZL1 underhood indentation: http://i265.photobucket.com/albums/i...pse6f56401.jpg Of course the Gold Bowties had to go straight away too as they did on my 2011 SS: http://i265.photobucket.com/albums/i...psaf70653a.jpg And the yellow DRL's did nothing for me either, so they didn't last too long at all: http://i265.photobucket.com/albums/i...pse3e3b22e.jpg One other item I had ready and waiting were some ZL1 mats ordered from Rodgers of course! :wub: http://i265.photobucket.com/albums/i...ps0ce542ff.jpg I also had some xenon white LED's lying about that I never installed in the SS, so in they went to get rid of that horrible yellow light: http://i265.photobucket.com/albums/i...psae2fd6e0.jpg It was then time to actually drive the thing a little...and boy did it exceed expectations....I had read about Permagrin from all the people that had a 2012 and I wasn't really sure what they meant....it didn't take long to understand...as I said I loved my SS, but this ZL1 is just on a totally different level...:bow::happyanim: And the speed....well, there's a reason why this was installed pretty quickly....a Valentine One with Blendmount hardwired into the mirror: http://i265.photobucket.com/albums/i...psd3b18ffd.jpg At this point I'd run out of things to install and concentrated on getting past that break-in period! http://i265.photobucket.com/albums/i...psb7ce8c4c.jpg http://i265.photobucket.com/albums/i...ps07acba3c.jpg It didn't take long before more items were being delivered though....it's some bug once you've got it! :facepalm: :laugh: Next was a color matched Frame for my license plate: http://i265.photobucket.com/albums/i...psab8045c3.jpg And also some white xenon LED's for the lights above it..I told you I hated the yellow :laugh: http://i265.photobucket.com/albums/i...pse02458ba.jpg Then it was back to the engine bay...the red cover was painted summit white along with the strut brace and fuse box cover: http://i265.photobucket.com/albums/i...ps2664d393.jpg http://i265.photobucket.com/albums/i...ps62aa7ea2.jpg I felt that the Strut Brace needed a bit of color though, so I had Lupe paint me a ZL1 hood emblem Carbon Flash Metallic and Red and added that: http://i265.photobucket.com/albums/i...ps224843d1.jpg http://i265.photobucket.com/albums/i...ps4160e0dd.jpg Then I had Roger at Emblem Pro's make me a GM Performance Division Badge in Black and White so I could break up all the white on the Fuse Box Cover: http://i265.photobucket.com/albums/i...psc93e77c3.jpg After that I decided to spend $10 on changing out all the 10mm Bolts in the engine bay to keep my Black and White Theme continuing: http://i265.photobucket.com/albums/i...ps11c87267.jpg And I also added cap covers to all of the caps in the engine bay as I didn't like the plastic, along with adding a Camaro Oil Stick Cover: http://i265.photobucket.com/albums/i...ps9e4baa8e.jpg Next on the list was to change the taillight bezels - again Lupe painted them for me - Flat black this time: http://i265.photobucket.com/albums/i...ps8d135e89.jpg http://i265.photobucket.com/albums/i...ps68811c1f.jpg After that came the Showstopper Sidemarkers with tint: http://i265.photobucket.com/albums/i...ps046ac0bc.jpg http://i265.photobucket.com/albums/i...ps6b5d81f6.jpg http://i265.photobucket.com/albums/i...psa8527de5.jpg http://i265.photobucket.com/albums/i...psa758518f.jpg And then again back to the engine bay for some Strut Covers and a radiator shroud that Roger from Emblem Pro's made me: http://i265.photobucket.com/albums/i...pse2fdce0c.jpg http://i265.photobucket.com/albums/i...psc1a3f7b8.jpg Blue Footwell lights were next - these are wired to fade on and off with the Dome Light: http://i265.photobucket.com/albums/i...psca126b81.jpg And then it was time....the cosmetic mods had entertained me for 2 months but it was only a matter of time before the performance mods started, and that slippery slope started last week when I added the Roto-Fab CAI with Carbon Fiber Finish: http://i265.photobucket.com/albums/i...ps70040095.jpg So this is how my engine bay looks now....I'm much happier with the look compared to Stock: http://i265.photobucket.com/albums/i...ps4d88599f.jpg Hope you enjoyed reading anyway.....this is just the start, and the big performance mods will no doubt be here soon!! :laugh: :happyanim: http://i265.photobucket.com/albums/i...ps3fcdccfd.jpg http://i265.photobucket.com/albums/i...ps358c45d6.jpg |
Very Nice my Summit White brother...:thumbsup:
|
Quote:
We're close on the numbers too with mine being #2303...well sort of haha! :laugh: |
Dude such a badass car :confused0068: that thing is saweeeeeeeet. Great color choice although I may be a little bias haha hands down amazing ride man
|
We're certainly close in taste... lots of he same mods...
|
you have made your ZL1 look really nice, congrats
|
Very nice. Now I need a ZL1 lol
|
Quote:
Quote:
Quote:
|
Car is looking great. Nice work so far man.
diggin the black and white in the engine bay |
Thanks! :D
I forgot that I also added a couple of pieces to the Trunk Area. Summit White Trunk Panel with ZL1 Logo: http://i265.photobucket.com/albums/i...ps620e34e2.jpg http://i265.photobucket.com/albums/i...psd16fa35a.jpg And then I also changed the Trunk Light to a Xenon White LED: http://i265.photobucket.com/albums/i...ps1242fad1.jpg |
nice zl1 ! love the mods so far :popcorn:
|
Looks awesome so far love the mods tastefully done!
|
Quote:
Quote:
Thanks! It will be on the Dyno for the first time next weekend so hopefully I get decent results! :D |
Added 2 Aeroforce Interceptors with ZL1 faceplates to the A Pillar today - hooked up to the OBDII Port - these things are awesome and can scan absolutely loads - I have also programmed in the shift lights :)
http://i265.photobucket.com/albums/i...ps2e8ffde1.jpg http://i265.photobucket.com/albums/i...ps2ff69b42.jpg http://i265.photobucket.com/albums/i...pse964da1c.jpg |
All times are GMT -5. The time now is 10:39 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.