Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] (https://www.camaro5.com/forums/showthread.php?t=24276)

600hp-lpe 06-04-2012 02:28 PM

1 Attachment(s)
Jeez Chris... I pop in 'cause your thread is near the top o' the list..

Swaybar still in the box..
you dented your car...

and to top it all off,
Randy and Pete are having a field day with you!

it must be raining in FLA.. only 1 cloud in the sky..

garcmol 06-04-2012 02:30 PM

If you want a V6 fascia, I can give you one. It'll need paint though

GTAHVIT 06-04-2012 03:32 PM

Quote:

Originally Posted by garcmol (Post 5069886)
If you want a V6 fascia, I can give you one. It'll need paint though


I'm leaning more and more to a ZL1... wasn't really on my list... I kinda like the "sleeper" look of my car...

but... I do like the idea of a ZL1 front with the H Grille....

bhall82 06-04-2012 03:34 PM

Quote:

Originally Posted by GTAHVIT (Post 5068759)
My latest... Mod... :cry:


You're doing it wrong. There are easier ways to get cold air induction into intercooler :laugh:


Sorry to hear about your mishap man

GTAHVIT 06-04-2012 03:39 PM

Quote:

Originally Posted by bhall82 (Post 5070385)
You're doing it wrong. There are easier ways to get cold air induction into intercooler :laugh:


Sorry to hear about your mishap man

That's custom fabricat'n...

:laugh:

garcmol 06-04-2012 03:43 PM

It'll look great with the Heritage Grill! This was the best straight on shot I could find. Lot of color, but you get the idea.:thumbup:

http://www.camaro5.com/forums/attach...1&d=1338416971

JusticePete 06-04-2012 04:02 PM

What is the status on your new cold air induction project?

garcmol 06-04-2012 04:03 PM

Quote:

Originally Posted by JusticePete (Post 5070614)
What is the status on your new cold air induction project?

It whistles:laugh:

GTAHVIT 06-04-2012 04:09 PM

Quote:

Originally Posted by JusticePete (Post 5070614)
What is the status on your new cold air induction project?


well I finally got the new ZL1 Sway bar and LCA's installed :happyanim: so it was on to the next MOD! :D

:facepalm:
Quote:

Originally Posted by garcmol (Post 5070617)
It whistles:laugh:


:laughabove:


:help:

JusticePete 06-04-2012 04:35 PM

Quote:

Originally Posted by GTAHVIT (Post 5070662)
well I finally got the new ZL1 Sway bar and LCA's installed :happyanim: so it was on to the next MOD! :D

And..... :popcorn:

The Stig 06-04-2012 04:41 PM

you could also buy Showstoppers transformers grille. It's like $550 - but if the other guy is paying for it :rolleyes:

GTAHVIT 06-04-2012 04:43 PM

Pedders FE 4/5 Rear Swaybar and LCA upgrade
 
Quote:

Originally Posted by JusticePete (Post 5070893)
And..... :popcorn:

Finally got a chance to do some "testing" :laugh:

I need to put the front sway on full soft. and see the difference... but I can say the car will certainly carry more speed than it did before... No question...

I deliberately tried to get the rear end to let go... without any throttle input... but by just starting wide and decreasing the turn radius... and I was to chicken to find the point where it would let go... I'm by no means a pro diver so carrying the speed I was, I wasn't sure I'd be able to correct in time to keep from hitting a curb... There is no doubt the car is more connected in a turn... Seems to me that it is a little more forgiving to throttle inputs in a turn also... I was in 2nd doing about 50 in a turn and was blipping the gas to try and drift the car and it didn't come loose like it used to. It just went faster.... I had to jump on the gas to get it to break loose at lower speeds/sharper turns....

I'm really looking forward to getting on an Autox... just to learn where the limit is... I'm not good/brave enough to try and find it otherwise.

:thumbsup:

but I can say for a relative rookie like me the difference is noticeable....

:iono:

http://www.camaro5.com/forums/attach...1&d=1342805443

PQ 06-04-2012 06:29 PM

Quote:

Originally Posted by GTAHVIT (Post 5070958)
Finally got a chance to do some "testing" :laugh:

I need to put the front sway on full soft. and see the difference... but I can say the car will certainly carry more speed than it did before... No question...

I deliberately tried to get the rear end to let go... without any throttle input... but by just starting wide and decreasing the turn radius... and I was to chicken to find the point where it would let go... I'm by no means a pro diver so carrying the speed I was, I wasn't sure I'd be able to correct in time to keep from hitting a curb... There is no doubt the car is more connected in a turn... Seems to me that it is a little more forgiving to throttle inputs in a turn also... I was in 2nd doing about 50 in a turn and was blipping the gas to try and drift the car and it didn't come loose like it used to. It just went faster.... I had to jump on the gas to get it to break loose at lower speeds/sharper turns....

I'm really looking forward to getting on an Autox... just to learn where the limit is... I'm not good/brave enough to try and find it otherwise.

:thumbsup:

but I can say for a relative rookie like me the difference is noticeable....

:iono:

:headbang:

GTAHVIT 06-04-2012 06:40 PM

Quote:

Originally Posted by 600hp-lpe (Post 5069871)
Jeez Chris... I pop in 'cause your thread is near the top o' the list..

Swaybar still in the box..
you dented your car...

and to top it all off,
Randy and Pete are having a field day with you!

it must be raining in FLA.. only 1 cloud in the sky..

:laugh: well does your car have RAM air... LOL

Quote:

Originally Posted by stieger (Post 5070938)
you could also buy Showstoppers transformers grille. It's like $550 - but if the other guy is paying for it :rolleyes:

Must look into this... you have a link?


All times are GMT -5. The time now is 01:35 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.