Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Road Course/Track and Autocross (https://www.camaro5.com/forums/forumdisplay.php?f=219)
-   -   AutoX Builds (https://www.camaro5.com/forums/showthread.php?t=327633)

Colt 11-11-2013 09:39 AM

AutoX Builds
 
Hey guys, I thought it would be nice to have a thread for the few of us here that autocross. Something for us to look at for each other's builds and what not. Rather than finding people and searching through their build threads, you could just look through this thread and see what other people in your class have done, or that class you might want to switch to. Just post up a photo of your car and some specs about it, what class you are running in, and how long you've been autocrossing.


FS

Colt 11-11-2013 09:48 AM

Hopefully this post will help explain what my thoughts were for this thread.

Car: 2010 V6 Camaro
Class: F Stock (This is what my local club placed me in although I've heard from some that the V6s should not be in this class)
Build Thread: http://www.camaro5.com/forums/showthread.php?t=152378

I just started autocrossing this past fall, and I plan to run all of next year. I was with the SWVR group, but I'll be switching to Eastern TN next season.

http://farm8.staticflickr.com/7430/9...e35f4048_z.jpg

2010SSRSM6 11-13-2013 01:57 AM

Been to exactly one event. Had a blast but they are usually held when I'm stuck working. There is a large group out here in SoCal that are fanatics about it.

I've done most of the typical bolt in stuff (sways, springs, strut tower brace, slotted/dimpled break rotors, etc) and I'm stuck in the super modified class because if the blower, headers, cam, etc.

I just put the Hotchkis Strut tower brace in and haven't had it on the track yet, but I'm assuming it will work as advertised.

Next on the wish list are a set of 18" x 10" rims so I can get a square setup on the car with 305's on all 4 corners.


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 03:01 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.