Fixed the one thing that annoyed on my Rx Catch Can
3 Attachment(s)
I really like my Rx catch can but I cannot stand the drain valve. I always found it difficult to reach under the can and open and close the valve; especially if it was a bit tight.
I decided to take a trip to the hardware store and see what I could find to fix this. I ended up with a Husky air compressor ball valve (sku# 252 140). Anything with a 1/4" NPT male thread will work. The simple easy to turn handle is a whole lot better than twisting the original threaded piece. I used a bit of thread paste and 10 min later I was back in business. Check out the pictures below. |
Very nice. That's the one thing I can't stand about mine.
|
Nicely done. Looks great
|
Cool, yeah dont like the way it is now
|
Thats a cool idea, might do this myself :thumb:
|
This is a $10 option for any wanting it....much better. To retrofit, it is 1/4 NPT male thread.
Nice job! :thumbsup: |
great idea!
|
Quote:
|
Good option!
|
Mines still on order with Apex....didnt see the option either. Would have done that.
|
Jannetty had the RX CC's in stock a while back.
|
That's a good idea, that gives me another idea that I want to try, if it works I will let you guys know.
|
Great idea. Much better than the drain valve and clear tube that comes on the can
|
Very nice. I like.
|
All times are GMT -5. The time now is 12:41 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.