Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro V6 LLT Engine, Exhaust, and Bolt-Ons (https://www.camaro5.com/forums/forumdisplay.php?f=38)
-   -   Found a box of stuff on the porch today! (https://www.camaro5.com/forums/showthread.php?t=123746)

Beauwulf 01-11-2011 05:09 PM

Found a box of stuff on the porch today!
 
The next install starts this weekend (if I don't have to work)!

http://i283.photobucket.com/albums/k...g/db4b8b85.jpg

Intake and brake ducts going in under the front of the lower facia along with some extra supports for the splitter. Hope I can make it all fit! LOL!

jshaf 01-11-2011 05:19 PM

got my new wheels today, gonna be spring before I can put them on, will just have to keep peeking in the boxes and dreaming!

Beauwulf 01-11-2011 05:22 PM

Quote:

Originally Posted by jshaf (Post 2719896)
got my new wheels today, gonna be spring before I can put them on, will just have to keep peeking in the boxes and dreaming!

Got a photo of the wheels?

mrray13 01-11-2011 08:42 PM

We going to get install pics?

Beauwulf 01-11-2011 09:02 PM

Quote:

Originally Posted by mrray13 (Post 2720585)
We going to get install pics?

Of course... I should have the first parts done and posted Saturday nite.

Beauwulf 01-16-2011 06:40 PM

Well, I got the brake ducts all done this weekend. Don't have all the parts (or the time) to do the air intake tubes yet. Maybe next weekend.

Total cost: $110
Install time: 12 hours

Here's the nozzle and hole in the dust shield

http://i283.photobucket.com/albums/k...novruns016.jpg

Seen from above:

http://i283.photobucket.com/albums/k...vruns003-6.jpg

The intake duct installed. I had to do some trimming to the radiator deflector to get this in the spot I wanted it.

http://i283.photobucket.com/albums/k...vruns007-3.jpg

Front view (Rivets will be painted when I get it all finished):

http://i283.photobucket.com/albums/k...vruns012-1.jpg

Hose installation views:

http://i283.photobucket.com/albums/k...vruns010-1.jpg

http://i283.photobucket.com/albums/k...vruns002-6.jpg

Routing on the left side was a bit tight! Right side was OK.

http://i283.photobucket.com/albums/k...vruns006-3.jpg

Working on a creeper is hard on an old man!

http://i283.photobucket.com/albums/k...novruns019.jpg

Front view

http://i283.photobucket.com/albums/k...novruns020.jpg

I still have to do the air intake and the extra supports for the splitter...

More to come!

KMPrenger 01-16-2011 06:46 PM

Call me impressed! Nice job!

mcotton 01-16-2011 07:09 PM

very nice. Will keep checking the post for more updates

jagan323 01-16-2011 07:40 PM

Very interesting project!

Merc 01-16-2011 08:47 PM

Are you road racing your car on regular basis.:iono:

mrray13 01-16-2011 09:15 PM

Looking good. Can't wait to see pics with splitter installed.

craigd853 01-16-2011 09:36 PM

Way to much money for the amount of horsepower your putting out. If you have a turbo then i apologize in advance. I'm not even sure an SS needs this if they don't road race. Like the Mods but why spend that money on brakes unless ur going to make the car faster. Especially with the PFADT springs and shocks?

2010 SSRS 01-16-2011 09:42 PM

awesome job

danhr 01-16-2011 09:46 PM

uuuhhh

what are those suppose to do?


All times are GMT -5. The time now is 06:18 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.