Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   ZL1 Wheels/Tires (https://www.camaro5.com/forums/forumdisplay.php?f=156)
-   -   325-45/18 On Factory Reproductions 18's (https://www.camaro5.com/forums/showthread.php?t=533525)

d454brisson 07-10-2018 03:05 PM

325-45/18 On Factory Reproductions 18's
 
5 Attachment(s)
325-45/18 Hoosiers Just barely fit all around, no rubbing yet.


Almost 30in dia, so in a quick run like the other poster under mid to hard break you may feel the ABS kick in due to tire speed diff. I may lower pressure a bit 32-33 now to see if dia flattens a bit and makes up for it.


Not sure why pics are sideways on comp and phone they look correct

d454brisson 07-10-2018 03:12 PM

1 Attachment(s)
Spun 20inch rim inside or Nitto NT05R

Switches 01-13-2019 11:03 AM

Did you have to run a spacer with this wheel. Bought a set for drag radial. Just have t tested the figment yet

d454brisson 02-10-2019 08:35 PM

NO spacer needed, no rubbing inside.

Just make sure you fully turn off traction control with this combo or the computer will light up the dash with errors.



If you get the front and rears closer in Dia with wont.

bpc 04-01-2019 09:53 AM

Are the 325-45/18 Factory Reproductions 18x10 or are they 11 inch

Thanks

d454brisson 04-08-2019 10:53 AM

18x11 Factory reporductions

2SS2010SILVER 04-17-2019 04:30 PM

is your car factory height and did you have to tie back the ebrake cable

LIL QIK 04-18-2019 01:31 PM

Curious on how they performed....

acammer 04-18-2019 02:26 PM

Nice. My buddy runs an M&H 325/40/18 on the 18x11 FR41 (ZL1 Rep) on his ZL1 - it's a good combo. The DR2 looks nice and serious!

LIL QIK 11-27-2019 11:27 AM

Was there never any follow up on how these performed?

acammer 11-27-2019 11:51 AM

I like the DR2 - I ran a 275/40/17 for the back half of the 2019 season. They seem to hook up well right on the hit, and they hold the power well. Net time around, I might think about an ET-R instead, just to have some street-abililty. The DR2 is a DOT, but, Hoosier is pretty clear that it's not cut out for any street driving.


All times are GMT -5. The time now is 08:29 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.