Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Camaro ZL1 Forum - ZL1 Specific Topics (https://www.camaro5.com/forums/forumdisplay.php?f=85)
-   -   Need help finding part!! (https://www.camaro5.com/forums/showthread.php?t=573862)

BPickle23 04-21-2020 12:42 PM

Need help finding part!!
 
So during my replacement of the spring isolater for the supercharger I managed to break the small aluminum fitting that one of my vacuum lines from the actuator on the snout connects to. Currently still trying to get the rest of the fitting out of the hole without damaging anything. But I can not find a replacement for this thing anywhere.
To clarify it is on the passenger side on the front of the supercharger right behind actuator from snout. Any help appreciated!!

Bigtime53 04-21-2020 02:24 PM

Your best bet is to call one of the shops that polishes and ports the throttle bodies and see if they could help you. Look on the vendor site here and give them a call. I doubt you can get that from a GM dealer. Good luck

Juiced1 04-22-2020 09:22 AM

Take a picture and post it. Or email it to us at info@juicedmotorsports.com and we'll take a look. If you broke off what I think you did you might be in some trouble but a good welding should be able to repair it.


All times are GMT -5. The time now is 01:34 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.