Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Member Car Journals (https://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12] (https://www.camaro5.com/forums/showthread.php?t=24276)

JusticePete 03-21-2011 04:53 PM

Chris would you post your ride hieghts measured Pedders style?

http://forums.peddersusa.com/imageho...c099324d7d.jpg

PQ 03-21-2011 05:02 PM

Quote:

Originally Posted by JusticePete (Post 2990664)
It is a shame that most shops do not do this. No one is asking to have it done for free. In a business shop it is really easy. Put it on a lift. Loosen the bolts. Drive around the shop lot and on to the alignment rack. Tighten the bolts and proceed with the alignment. It can't take an hour.

At home you can do it with boards. It is a little bit trickier to get to the bolts, but it is doable and it works.

(2) 2x12x48
(2) 2x12x36
(4) 2x12x12

You will be able to drive up in steps and the wheels will be evenly loaded. In the shop and at home we have these boards cover in truck bedliner. You can keep them clean and they don't slip. You can use 8 or 10" boards to cut costs, but you get the idea.

Timing the bushes is the difference between doing a half axxed job and doing it right.

All of the shops that I've dealt with here don't want a customers input on anything.

And I suppose it must be a pain when a know it all customer tries to tell you how to do your stuff, but it sucks when they just 'tune you out' as a potential pain in theri ass, when there are times when we might know something.

Quote:

Originally Posted by Jay_LHD3 (Post 2990745)
My alignment shop did not know what I was talking about. I gave them Pete's instructions and after they read it they agreed it made sense.

You can tell the difference afterwards, it removes that "spring board" feel!!



:thumbsup:

I"m gonna do it on mine, but I'll just use my wood ramps here at home to tighten them before I go to the alignment shop. IF I find a shop that can do an alignment. They've all run from it in the past.

Quote:

Originally Posted by mlee (Post 2991014)
Car looks GREAT... but I thought you were going to lower it...:iono:

:bellyroll:

GTAHVIT 03-21-2011 10:54 PM

Quote:

Originally Posted by mlee (Post 2991014)
Car looks GREAT... but I thought you were going to lower it...:iono:

:mad0260:

:laugh:


Quote:

Originally Posted by JusticePete (Post 2991078)
Chris would you post your ride hieghts measured Pedders style?

http://forums.peddersusa.com/imageho...c099324d7d.jpg

Will do, first thing tomorrow before I head to work :D

:thumbsup:

Jekyll-N-Hyde 03-21-2011 11:18 PM

Hell Yeah Car looks Dam Good Chris :thumbsup:

TAG UR IT 03-22-2011 01:17 AM

Lookin' good, man!

GTAHVIT 03-22-2011 10:47 AM

Quote:

Originally Posted by JusticePete (Post 2991078)
Chris would you post your ride hieghts measured Pedders style?

http://forums.peddersusa.com/imageho...c099324d7d.jpg

OK

Fronts 64.8 CM

Rears 66.5 CM

And they are exactly the same on both sides.. I did not adjust the ride height at all.. They are set as they came from the factory.

Not that it affects ride height, but, we put the preload on the rears at 5mm and about 3 mm up front. I shot some video of how to set the preload on the rears, same process as the fronts.


Alignment,

Jerry Hamm here in Jax has a real good Corvette/Camaro Tech named Mike.

After I asked him to time the bushings he said no problem. In fact he said... I'm glad you asked me to do that it makes perfect sense....

I didn't ask him for any custom alignment, especially since I'm about to drive 4K miles here in a couple weeks... But they're gonna take care of me.

:thumbsup:

600hp-lpe 03-22-2011 12:50 PM

cool.. nice to see SOMEONE has a decent alignment shop (Besides me) to go to..;)

Rob at Wretched Motorsports keeps me Inline..

Looks like PQ needs to move near you so he can get air to stay in his tires, and keep parts from falling off..:yikes:

Mr Twisty 03-22-2011 01:22 PM

Quote:

Originally Posted by 600hp-lpe (Post 2994665)

Looks like PQ needs to move near you so he can get air to stay in his tires, and keep parts from falling off..:yikes:

:facepalm:

:bellyroll:

PQ 03-22-2011 01:31 PM

1 Attachment(s)
Quote:

Originally Posted by GTAHVIT (Post 2994128)
After I asked him to time the bushings he said no problem. In fact he said... I'm glad you asked me to do that it makes perfect sense....

:mad0259: Blah Blah Blah,,,,,,, "Look at me..... I live in Jacksonville where I have access to all the cool stuff............ and good shops......... and parts".......... blah blah blah.......... Attachment 219274

I need lug nuts...... gotta order them.
I need a fuel schreader valve....... gotta order it.
I need a dyno tune......... gotta drive 7 hours to get it.
I need a decent alignment....... :help:

But NOOoooooOOOOoooo........... not Mister fortunate here......

Chris: "Oh..... looky there, a speed shop with all the resources opens up across the street. How luck am I?"

:suicide:<<<<<<<<<<< PQ


















*ahem*


Ok. I"m ok.


:bellyroll:



Quote:

Originally Posted by 600hp-lpe (Post 2994665)
Looks like PQ needs to move near you so he can get air to stay in his tires, and keep parts from falling off..:yikes:

:word:

WadeWilson 03-22-2011 01:33 PM

Looking good bro!! :respekt:

zebra 03-22-2011 02:44 PM

somebody's being a whiny little diva :rolleyes:

GTAHVIT 03-22-2011 03:31 PM

OH... and my car is straight as an arrow now

:D

Just sayin....


so Pete... you know, since the supercars are SOOOOooooOOOOOOOOooooo adjustable...

Say if I were to have a grudge match with a "friend" and say we were going to do both Autox aaaannd Drag racing... what would be the recommended settings on both rebound and compression for all four of my adjustable coilovers for both autox and drag racing?????


hmmmm?????

:D

Darth_Emma 03-22-2011 03:43 PM

Quote:

Originally Posted by GTAHVIT (Post 2995427)
OH... and my car is straight as an arrow now

:D

Just sayin....


so Pete... you know, since the supercars are SOOOOooooOOOOOOOOooooo adjustable...

Say if I were to have a grudge match with a "friend" and say we were going to do both Autox aaaannd Drag racing... what would be the recommended settings on both rebound and compression for all four of my adjustable coilovers for both autox and drag racing?????


hmmmm?????

:D


... he's going to be insufferable until after the fest...

GTAHVIT 03-22-2011 04:04 PM

Quote:

Originally Posted by Darth_Emma (Post 2995483)
... he's going to be insufferable until after the fest...

http://gorakhpurinfo.com/images%5Csmiley%5Cyes.gif


All times are GMT -5. The time now is 08:02 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.