Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   5th Gen Camaro SS LS LT General Discussions (https://www.camaro5.com/forums/forumdisplay.php?f=2)
-   -   I'm so tired of this (https://www.camaro5.com/forums/showthread.php?t=132552)

spyderbuddy 03-02-2011 07:02 PM

I'm so tired of this
 
5 Attachment(s)
When we bought the Camaro in Feb of 2010, the top corners of the front air damn were not attached to the fender. We were told this is the way it was supposed to be. Then I went to the Camaro Fest and saw several other cars with the GFX kit on them. Anyway I'm tired of the Bulls**t from GM. I have tried to fix it myself, within a week it is coming apart again. I really don't know what to do. It looks bad.

mikeSS 03-02-2011 07:04 PM

that would bug the hell out of be

Cully 03-02-2011 07:05 PM

Sorry to hear about your bad experience. Sure looks like installer error or part defect to me. We just installed one of these kits on a friends car and it fit like a glove.

Sevn86 03-02-2011 07:09 PM

It doesn't seem to be installed correctly...or the part is defected...

RLHMARINES 03-02-2011 07:23 PM

That was not GM's fault, you need to get after your dealer who installed it. Trying to blame GM for a dealer installed option snafu....just make sure to understand what is and is not installed by the factory and what is done at dealer prep time.

Mr. Wyndham 03-02-2011 07:25 PM

Quote:

Originally Posted by RLHMARINES (Post 2909282)
That was not GM's fault, you need to get after your dealer who installed it.

This.

That doesn't look right at all...make the dealer who installed it fix it. Otherwise, open a case with GM customer service.

Revo1 03-02-2011 07:26 PM

Did they install the wrong set?? This looks so misaligned I have to wonder if this set was intended for SS........

ron10 03-02-2011 07:27 PM

needless to say.it is not supposed to look like that.
dealer favorite saying,that's normal or,it's supposed to be like that.

Sevn86 03-02-2011 07:36 PM

Quote:

Originally Posted by Revo1 (Post 2909305)
Did they install the wrong set?? This looks so misaligned I have to wonder if this set was intended for SS........

I think your right...looks like it is made for the SS.

spyderbuddy 03-02-2011 07:40 PM

Well I got with a Different Dealer, and the parts came with the car. Yes it was installed at the dealer, but from what I understand, a company (part of GM) came down and installed it on the car. So as far as I'm concerned GM did install this. WE DID NOT HAVE THIS PUT ON THIS CAR IT CAME THIS WAY. So GM needs to fix this.

Revo1 03-02-2011 07:40 PM

Quote:

Originally Posted by Sevn86 (Post 2909365)
I think your right...looks like it is made for the SS.

http://i425.photobucket.com/albums/p.../squarepeg.jpg

Gavros 4 Life 03-02-2011 07:42 PM

they F***ed up make them fix it!!!!

wrbear 03-02-2011 07:48 PM

3 Attachment(s)
I installed my own and there should be riveted snaps there that keeps that from happening. There should be no reason other than them not putting the parts on for this to happen considering the gap you have. I attached the pattern for the holes and the piece if it helps to resolve this.
Attachment 212223

Attachment 212224

Attachment 212225

2010SLVRBULIT 03-02-2011 07:53 PM

what's holding the sides together, double-sided tape(get wet)?:thumbdown:
--your dealer's not helping you, either?


All times are GMT -5. The time now is 09:51 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.