Hurst Shifter Fix
I installed the Hurst shifter, after only a few hundred miles on it the side play was rediculous. I called Hurst and they sent out a "new" design bushing. I recieved it and it was the same as originally that came with the shifter. What I did to fix the problem was design and MFG my own. I made a split bushing out of oilite bronze (SEA841), I Incresed the side surface area ( to increse side load stability ) Turned the O.D for a +.001 slip fit. Bored the I.D to -.0005 under size then took the original locating pin and burnished the bore to the pin. After thousands of miles I still have virtually zero play in the shifter. It's a great product,.. just needs a different bushing material..
|
Quote:
|
I think the bushing from Hurst is Teflon or something similar. NH-SS, I wish you sold those bushings you made!!! I'd buy one!!!
|
The bushing from Hurst I believe is PTFE (Teflon)
|
can u make me one?
|
If there's enough demand for a replacement bushing out there I guess I could set up to make some more. The only issue I see is not being able to take the MFG production tolerence into account. I made my custom bushing to match my shifters pin O.D. & shifter I.D. Every shifter will have a + or - tolerance difference. But,..I willing to help out. The Hurst shifter is very nice,.. and with a replacement bushing it's pretty much perfect. So,.. how many of you would like these ??
|
Quote:
|
I'll take one.....
|
I haven't installed my kit yet. I'd rather do it once and do it right so I'll take one!
|
Well OK,..I will make some of these shifter bushings next week. I will let you know when there ready.
|
I will take two, I have two buddy's that I run with, and I know they will take at least one each. Making that four maybe more..
|
I need to fix mine. I would take one. How did you fix it? did you have to take the whole shifter out or can you just pull out the bushings and put the new bushings in?
|
just replace the Hurst bushing with this new replacement. Sooo,.. how many am I making ??
|
Quote:
Me too :thumbsup: JM |
All times are GMT -5. The time now is 06:24 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.