Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Audio / Visual / Electronics/ Gauges / Nav (https://www.camaro5.com/forums/forumdisplay.php?f=106)
-   -   Alpine PDX M12 *1,200 watt Amp*FOR SALE (https://www.camaro5.com/forums/showthread.php?t=339673)

tonyG 01-29-2014 02:23 PM

Alpine PDX M12 *1,200 watt Amp*FOR SALE
 
3 Attachment(s)
***FOR SALE*****
I have an Alpine PDX M12 amp for sale. Hardly used, I had it in my old car which was hardly driven for about a year. Its been in my closet since then and I have no need for it anymore (i like the sound of horsepower better)

1,200 watts rms @ 2-4 ohms


Im asking 425.00 OBO.
Attachment 595251Attachment 595252Attachment 595253
more info from alpine

Features and Specification

SPECIFICATIONS

CEA-2006 Power Ratings
CEA-2006 Power Rating: (4/2 I? @14.4V Ƈ%THD+N), S/N 92dBA, ref:1W into 4 I?) 1200W x 1
RMS Power Ratings
Per channel into 4 Ohms: (@14.4V Ƈ%THD+N) 1200W x 1
Per channel into 2 Ohms: (@14.4V Ƈ%THD+N) 1200W x 1
Sound Tuning
Crossover Frequency (LPF): Variable, 50Hz - 400Hz (-24dB / oct), (Variable, L.P.F Only 1/2 ch)
Subsonic Filter: OFF / 15Hz / 30Hz
Dimensions
Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2''
General
Power Requirements: 14.4V DC (11V to 16V)
Input Sensitivity (RCA Input): Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker)
Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ohms)
Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 4 or 1 I?
Frequency Response (+0, -1dB: 1W into 4 Ohms) for CH-1/2/3/4: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 92 dBA
FEATURES

Install
Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals)
Terminal Layout: One-Sided
Mounting Design: Easy Stacking and Clean-look intallation
General
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Thermal Protection:
Low-battery Protection:
Power Supply: Resonant Mode Power Supply
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: STAR Ciruit
Current Protection: Auto Over-Current Protection
Power Indicator: Top Mounted Blue LED Power/Status Indicator
RCA Output: Non-Fading Pre-Amp Output
Crossover: Adjustable Low-Pass
Pre-Amp Stage: Discrete
Final Outputs: MOSFET
Board Design: 6-Layer Glass Epoxy PC Board
Gain Control: Adjustable
Bass Control: Remote Bass Control (Sold Separately)


All times are GMT -5. The time now is 01:24 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.