Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (https://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   clutch can handle 650 RWHP.Q (https://www.camaro5.com/forums/showthread.php?t=267935)

MS7 12-28-2012 08:25 AM

clutch can handle 650 RWHP.Q
 
My camaro now with 625 RWHP and the stock :facepalm:clutch cannot handle this high power..os the time for get new one.

i need clutch can handle 650 RWHP with no problem& good price for my camaro 2011
.FYI my gool is 650 RWHP no more?

thanks

2SS45th 12-28-2012 09:21 AM

SPEC Stage 2+ single disc holds 715ft lbs of torque, and retails for $501. You reuse your flywheel, so it's good bang for your buck. I have the SPEC Stage 3+.

Detoxx03 12-28-2012 10:02 AM

RPS BC2

VanquisherSS 12-28-2012 10:23 AM

I got 844whp on the stock clutch. No probs so far.

simon.w 12-28-2012 11:02 AM

Mantic ER2.

Comes as a complete kit including flywheel and throw out bearing.

The clutch plate is dual friction ... Cerametalic on one side, organic on the other.

The pressure plate is spheroidal graphite iron which is 3 times stronger than normal iron and grooved like high end brake rotors to increase friction and dissapate heat.

A lot of very modern science behind the product ... Check out their website:

http://www.mantic.com.au

http://i1120.photobucket.com/albums/...ps20bfb0c2.jpg

Twin2010 12-28-2012 11:14 AM

I did the zr1 kit from slp.The pedal still feels stock. I love it

SSTony 12-28-2012 01:46 PM

I went with the centerforce. Love it

TurboCamaro 12-29-2012 11:35 AM

We put a Center Force Dual Friction in our development car, it now has 26,000 miles on plus over 500 hours of Dyno abuse...the clutch is awesome. Contact Will at Center Force

MS7 01-01-2013 11:06 AM

Quote:

Originally Posted by 2SS45th (Post 5964499)
SPEC Stage 2+ single disc holds 715ft lbs of torque, and retails for $501. You reuse your flywheel, so it's good bang for your buck. I have the SPEC Stage 3+.


you mean.. i can use the stock flywheel with it?:facepalm:

Hendrix-Engineering 01-01-2013 07:52 PM

Quote:

Originally Posted by 2SS45th (Post 5964499)
SPEC Stage 2+ single disc holds 715ft lbs of torque, and retails for $501. You reuse your flywheel, so it's good bang for your buck. I have the SPEC Stage 3+.

BAD,very bad idea

Hendrix-Engineering 01-01-2013 07:53 PM

Quote:

Originally Posted by Detoxx03 (Post 5964643)
RPS BC2

GREAT clutch,however they dont offer one for the new camaro

blufin 01-01-2013 10:46 PM

Love my Street Slayer dual carbon.

maxdmax 01-02-2013 05:10 AM

I have had a few clutches in my car, When we were doing our last mods we call a lot of clutch manufactures. As soon as we said we need a clutch that will hold at 800+ foot pounds of torque, things either got silent for a minute or we got transferred to somebody else. I finally broke down and got a Hendrix Street Slayer Carbon Triple Disc clutch, this is by far the best clutch I ever used in any car. Guys the Street Slayer Carbon clutch is the clutch right now for our heavy cars.

Boost6924 01-02-2013 09:42 AM

Can't go wrong with RPS clutches.


All times are GMT -5. The time now is 10:34 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.