Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

- Camaro ZL1 Forum - ZL1 Specific Topics (https://www.camaro5.com/forums/forumdisplay.php?f=85)

- - Next steps for moding (https://www.camaro5.com/forums/showthread.php?t=538372)

Next steps for moding

Need some help for next steps for new mods

My current mods are as follows
1. CAI intake from cold air inductions
2. 1 7/8 long tub headers with hi-flow cats
3. 10% crank pulley
4. Snow performance meth kit
5. oil Catch can
6. All tuned on mustang dyno 607hp and 601TQ

I would like to install next Mods

1. BTR stage 2 or 3 cam kit
2. 18% crank pulley
3. Heat exchanger

Am I missing something or any suggestion, Not sure about the 18% pulley will it help or do I need to get a reposition bracket. I am looking to reach 700 plus HP to the wheels

Thanks for any help

Will need:
id 850 or 1050 or comparable injectors plus injector tune ( most have had best luck with this brand)
Boost a pump, Kenne Bell, MSD or JMS (JMS is a pretty easy install with a pedal trigger)
May want oil fill vent with one way valve

Will need a boost a pump, aux fuel system or a full fuel system