mrusse0213’s all out TSP build thread
36 Attachment(s)
We’re about 2 weeks out from going all in on my build and pulling the engine and installing everything. Thought I would post some photos of some of the parts I’ve managed to get for the build. We haven’t yet pulled the plastic off the 416 yet and the forced induction interchiller and Crawford racing complete fuel system are at my shop where the install is taking place. I will update with pics of those items once I’ve actually laid eyes them. Until then enjoy some pics of the parts I have on hand for the build.
|
Are there target power/torque numbers you're aiming for?
|
Quote:
|
Billet Pedals showed up
2 Attachment(s)
Performance Pedals Billet Aluminum Camaro racing pedals countersunk with their grid pattern showed up today.
|
Tear Down Has Begun
7 Attachment(s)
Officially started the tear down on Monday. Still waiting on the C&R Racing radiator to show up and the DMS fender coolant tank both should be here in the next couple of days. The Whipple is off and out to Crawford Racing for the port injection modification.
|
Progress being made
12 Attachment(s)
In the early stages but its starting to come together. Unwrapped the 416 today and started dressing it. Radiator showed today, now just patiently waiting on Crawford Racing to complete the port injection modification on the Whipple.
|
Quote:
Parts are all looking good, glad to see the install has started. Going to be a torque monster! Hope you’ve got sticky tires… ;) :burnrubber: |
Quote:
|
Quote:
Crawford system is really bonkers lol. But it’s awesome and should let you rock and roll with no fueling concerns at all. :thumbup: Good luck and keep the pics coming! |
1 Attachment(s)
Quote:
|
Can you provide the info for the ZLE front end? Where purchased? Fitment?
|
Ikon ZL1 front end conversion
Quote:
purchased via Ebay from the Ikon Motorsports store paid right @ $850ish shipped. |
Random Shots
9 Attachment(s)
Posting a random shot of the left rear suspensin of the car, the Forced Induction Interchiller sitting in its new home as well as the DMS fender coolant tank in place & a couple of some of the components of the Crawford Racing/Fore Fuel System.
|
First Day Dyno Results
1 Attachment(s)
So it’s been awhile since updating we had some unexpected issues with getting the whipple back from the port injection modification we had to wait awhile on it to be completed. The car is still awaiting the Holley Performance EFI ecu they’re out of stock and looking like mid November before they’re back in stock. When it gets installed the full send tune and pulley swap will happen. Car has a super conservative tune in it right now. For the break in period we are going to leave the car where it currently sits and crank it up full send once we’ve done the break in and have the remaining HP fuel component. Currently the car is sitting at around 8.5 lbs of boost with low timing and running a little on the rich side for break in. Below you’ll see the numbers they’re pretty impressive considering a proper tune will most likely Net another 30-60 rwhp alone. Lastly when we go to the final tune/Dyno time we’ll be swapping out the 3.625 currently on it for the 3.250, 3.125 or 3.00. Another thing to note is the car was shut down around 6400 rpm which will change as well once break in is complete. Stay Tuned
|
All times are GMT -5. The time now is 12:56 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.