1LE trailing arms
 

I have BMR upper and lower trailing arms to install and see that the bolts tend to be 1 time use. I see the one set that I'll need does anyone know where to get these others in red? Not showing an option to purchase. I believe blue are the other bolts needed.

You don't need #9 for trailing arms. And #10 would be only needed for an alignment (camber).

The ones you circled red are all the same. This includes the inner mounting bolts of the upper and lower trailing arms that are not shown. You need 8 total of part #11610908.
The nuts are reusable.

BOLT,REAR SUSPENSION TRAILING ARM
AG, AH, AJ, AK37-67 * (LOWER OUTER)(SINGLE USE)(M12X1.75X70, 66THD)(26.6 OD)
List Price: $7.18



Attachment 1149409

I just went through this as well. Here is my cheat sheet, I did SPL toe rods, upper arms, and BMR upper and lower trailing arms.

RF RearLower Control Arm Inner Bolt - 11610915
LF RearLower Control Arm Inner Bolt - 11610915
RF FrontLower Control Arm Inner Bolt - 11611268
LF FrontLower Control Arm Inner Bolt - 11611268
RF/RR Strut Upper Mounting Bolts (6) - 11548081
RF/LF Strut Lower Mounting Bolts (4) - 11547494

RR Lower Control Arm Outer Bolt - 11547215
LR Lower Control Arm Outer Bolt - 11547215
RR Lower Control Arm Inner Bolt - 11611841
LR Lower Control Arm Inner Bolt - 11611841
RR Upper Control Arm Outer Bolt - 11610908
LR Upper Control Arm Outer Bolt - 11610908
RR Upper Control Arm Inner Bolt - 11610909
LR Upper Control Arm Inner Bolt - 11610909
RR Shock Bolt Lower - 11609598
LR Shock Bolt Lower - 11609598
RR Toe Link Outer Bolt - 11609598
LR Toe Link Outer Bolt - 11609598
RR Toe Link Inner Bolt - 11611276
LR Toe Link Inner Bolt - 11611276
RR Lower SwayBar Link Bolt - 11518630
LR Lower SwayBar Link Bolt - 11518630
RR Shock Bolt Lower - 11609598
LR Shock Bolt Lower - 11609598

LR Cradle Front Bolt - 11547921
RR Cradle Front Bolt - 11547921
RR Cradle Rear Bolt - 11611819
LR Cradle Rear Bolt - 11611819

Great part number list. Thank you very much for posting.

Thanks! Yeah was trying to figure out, my diagram sucked! Thanks everyone!