OK, this is a bit of a long one, so I'll break each up into their own sections
Coil Harness
ABS/StabiliTrak
VVT Delete
This is the coil harness.
One of the harness came in today -- big difference. Wire length is longer and, you had to pay attention to how the harness is installed - remember, these are on the 'back' of a coil bracket, so, looking @ this:
Now arranged:
You can see how much longer the new ones are and, the connector differences.
NOTE:
We need to setup the harness backwards (I believe these are directional). so, when I removed the harness cover, I flipped the harness and now #2 connector is to the right -- I then 'dotted' them so I know which one went where.
Here is the part #:
Routed the coil harness where the previous one was -- worked perfect and, lot more wire to route correctly. This did solve the 'miss' @ idle but, did not solve the StabiliTrak/ABS error. Also, the % of Alcohol has not blipped yet, -- have to wait until the ABS is taken care of..
-Don