Installed air scoop and washer bottle relocate from Phastek. The water bottle didn't fit where it was supposed to. A) It would have been blocking access to the DRL and B) the bottle pushed the fender well out making the tire rub when turning to the right (275 tires on front). Moved the bottle down lower on the scoop and a bit forward. This fixed both problems.
This is the material I pulled out from behind the grill for the scoop.
IMG_20171111_164737 by
J N, on Flickr
This is how I ended up mounting the bottle to the scoop for clearance. Only held on by two bolts but that should be more than enough.
IMG_20171112_085321 by
J N, on Flickr
All mounted up
IMG_20171112_093857 by
J N, on Flickr
Can see a bit of the scoop thru the lower grill
IMG_20171111_164838 by
J N, on Flickr
Looking down thru the CAI at scoop and bottle. For reference the front of the car is to the upper left. You can clearly see why the bottle wouldn't work where the pre-drilled holes were.
IMG_20171112_101846 by
J N, on Flickr