|
Was beginning to hear some whine and other disturbing noises from the stock transmission which has served me well over the years. It has been my experience that once a part gets weak then it is only a matter of time before it goes so I bit the bullet and will be replacing the stock tranny with RPM's Level VII TR6060 which includes cryogenic treating. I had to swallow hard on this one cause it is expensive, but my shop assures me it is worth the $$$.
Now if ATI would just make that Super Pulley/Sprag in something that wont rust and look like crap then I would be happy. Did you guys see the pics? Lovely to pop the hood to show someone your engine and that rusty sprag is there to greet you!
__________________
F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi
Blower Cam
Brodix BP BR 3 Heads
Kooks LT Headers and full 3" exhaust
Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion
DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears
McLeod RXT Twin HD Clutch & Upgraded Slave
RPM Level VII TR6060
BMR Drag Suspension Package w/Strange shocks
Carlyle 15" and M/T ET Street R radials
10.1 @ 143 mph 1/4 mile
|