|
1/4 inch is a fair bit I would take slack out by pushing up, then get a piece of keystock 5/16"?the length of plate,might do both sides for continuity place against and parrallel to the plates and get it welded as a bottom fence
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow cats  Locks@7.5 degrees castor and radius arm inserts, Ride Tech 2 coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings |