Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - ADM lsa conversion pulley limitations solved!

genius4m · 04-27-2018, 11:02 PM

Sorry for the late, I've been through a lot blowing my head gasket and getting broken heads ��

Wrong belt size caused a slight belt slip, I have solved it and my smart ass pushed the pedal wot to try out if the belt slip is gone, yes it did but that gave me 1 more psi " tune was not adjusted for 14 psi" and ka booom

Anyhow, dyno number is 686 thru 305 slicks with 20 psi pressure.

This is With the minor belt slip..

The stock heads are choking my 408 , want to buy blueprint 270cc heads with 77cc combustion chamber, haven't seen any review about them idk, exhaust flow in these are just amazing.

Any feedbacks?

04-27-2018, 11:02 PM	#7
genius4m Drives: CamaroSS 408CI LSA SC Join Date: Oct 2016 Location: Aurora Posts: 38	Sorry for the late, I've been through a lot blowing my head gasket and getting broken heads �� Wrong belt size caused a slight belt slip, I have solved it and my smart ass pushed the pedal wot to try out if the belt slip is gone, yes it did but that gave me 1 more psi " tune was not adjusted for 14 psi" and ka booom Anyhow, dyno number is 686 thru 305 slicks with 20 psi pressure. This is With the minor belt slip.. The stock heads are choking my 408 , want to buy blueprint 270cc heads with 77cc combustion chamber, haven't seen any review about them idk, exhaust flow in these are just amazing. Any feedbacks? Last edited by genius4m; 04-27-2018 at 11:27 PM.