Quote:
Originally Posted by ZLeeper
Hello Ted,
The dipstick looks great. I have been trying to install this but with no success.
Removing the bolt was simple, unclipping the main harness that goes along the transmission and along the back of the block near where the tube path goes to get it out of the way as much as possible was simple, it is limited by length by the heat shrink harness that goes to the starter. I have tried manipulating the dipstick in multiple ways around that harness that has limited length. Trying the get the bolt hole to line up with Maybe the picture can help but I am open for suggestions from the field on what they did to get around this. This is a 2013 ZL1 4L90E Trans. Not sure what I am missing here.
The harness will not move any further without separating something.
|
I believe your are supposed to go under/below the harness