View Single Post
Old 06-08-2018, 09:01 PM   #1
Cheap Guy
 
Cheap Guy's Avatar
 
Drives: 2011 Camaro SS
Join Date: Nov 2017
Location: Southeast Michigan
Posts: 681
Tried foam gun and leaf blower drying

I’m old school but wanted to try two new techniques today, the foam gun for washing and the leaf blower for drying. I got the foam gun from Walmart for $20 and the leaf blower is a Craftsman Electric Leaf Blower 160 mph 180 CFM, for $40.

The foam gun wasn’t too bad but I prefer the old two bucket method better. I usually make a decent amount of suds the old way and it seems like I used a lot more car wash using the foam gun. I also like the constant rinsing of the wash cloth in clean water using the rinse bucket. I’ll try it one more time before I render final judgement. As far as time, I think it may be quicker using the bucket method.

The leaf blower is going back. It just didn’t seem to get the car dried off the way I prefer. Also, if you missed a spot during the wash, you usually clean it up during the microfiber dry. It also took longer when you factor in dragging the cord out.
__________________
My Little Mid-Life Crisis Cure!

First - 1997 Camaro 3800 Y87, M5, Green - Gone | Second - 1997 LT1 Z28, M6, Silver - Sold | Third - 1999 LS1 Z28, M6, Pewter, Almost Stock! - Sold
Current - 2011 Camaro SS, M6, black, 1LE suspension parts - Current
Cheap Guy is offline   Reply With Quote