Well my friends, this is another one of those 'I should have done it a long time ago' mods...
I was able to get it installed in about a half hour. Fairly easy doing it by myself after work at our shop. The instructions suck, as mentioned. I mounted everything on the louver first... didn't even need the 'templates', test-fit it, then I was able to hold it down and remove the sticky tape film, applying firm pressure.
I think it looks great. It definitely 'beefed' up the rear end dontcha think?
I had to be in Phoenix today and I took the opportunity to drive out there. Doing 90 plus, they held up great and do not rattle, do not shake from the high winds. Its just sat there firm, and it didn't fly off lol... yeah, I was a bit nervous it would just fly off the back and I'd never see it again on that I-10 desert between AZ and CA. Got up to 110 degrees I think on one stretch...
I took these pics in Phoenix today... on one of the pics, you can see how much rear visibility is inhibited... nothing bothersome at all. Pictures are untouched except for that wipe on my plate.
