Quote:
Originally Posted by BWilsonSr
Trying to get these things lined up to install, and it says it uses OEM screw locations...WHAT screws??? Anyone installed these before on the front rear? It comes with 4 screws, which would indicate it uses one of the lower screws in the wheel well (I see 2 in there), but there no others. I definitely don't want to do any drilling, and these things don't come with 3m tape or anything....
Just trying to figure it out before I start on it and mess something up. This is different than when I put them on my 5th and 6th gen SS, which did actually have screws to use (and they had 3M tape). I really would hate to start putting my own holes in the wheel well (in fact, I may skip doing these since that appears to be what has to be done). The instructions are a joke.
|
I wonder if you did the same thing I did and not order the deluxe Z/28 kit. The basic Deluxe kit has two holes pre-drilled and the Z/28 kit has one
They can be made to fit but requires one hole drilled and two nylon spacers used to make the other two holes work with longer screws