Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 03-27-2019, 10:30 PM

OK, finally got the BMR bushings!

Here is what those look like:

Getting it started by hand first:

Had to use a 'wheel bearing press' then, using a 27mm socket, 32 mm wrench, cranked it down (boy, that was hard!):

Now, my snap ring pliers are not 'big' enough so, getting those. After that is set, I'll be able to finally do the install!

-Don

03-27-2019, 10:30 PM	#2425
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	OK, finally got the BMR bushings! Here is what those look like: Getting it started by hand first: Had to use a 'wheel bearing press' then, using a 27mm socket, 32 mm wrench, cranked it down (boy, that was hard!): Now, my snap ring pliers are not 'big' enough so, getting those. After that is set, I'll be able to finally do the install! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 03-29-2019 at 12:23 AM.