Quote:
Originally Posted by Benman
Thanks, just ordered a set, I am at 86K miles, and about to start adding LTH, cam etc
|
I commented on PePeLePew's video a while back, a good tip when you do the headers is to get (2) M8 studs from home depot
https://www.homedepot.com/p/Crown-Bo...4748/203538240
(or your preferred hw store) so that you can screw them into the head and hang the gaskets to hold them in place while you run the headers up from under the car and guide you in getting the header in place and hang it on those studs as well long enough to be able to get your new ARP 134-1102 header bolts on