|
I wouldn't recommend it for a few reasons.
Those springs and hardware are tired, which may cause valve control issues at higher rpm. What you don't see is just as dangerous, such as metal fatigue and stress fractures.
Most importantly, I do not know of any stage 3 cam that isn't considered high lift. Every L99 stage 3 cam I have seen is over 600 lift.
But in the end its your car. Just my 2 cents.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|