Quote:
Originally Posted by PepeLePew
I agree with Hunter. If you wiggle the harnesses connected to the BCM and it works again, you probably have a loose pin somewhere. Since the harness is new, it might mean you need a BCM. I wouldn't recommend trying to open it up and work on it unless you are an expert. If you find out it is the BCM, you'll have to program it to work.
|
UPDATE
after changing all the harness which included the ebcm connector the car still do the same problem
so i change the ebcm also with other one the car work fin for couple days then same problem again no crank no start until u touched the same harness in the same spot the car back normal and work fantastic
my old EBCM i opened as I'm electronic engineering and check pin by pin all looking good no loose no cute