Quote:
Originally Posted by sixty9fordkiller
If you're using an LS3 block, you can stroke and bore whatever you want on it and the GPI MAX package will work. Nothing changes for the top end
If you are stroking an LS3 to get 427 cubes out of it, the piston skirts are gonna come way down into the crankcase are. piston speed is gonna be through the roof. not sure if its a good combo if you wanna spin it too high
|
Do you know what the LS3 bottom end can
safely be bored / stroked to?
I suppose I could just ask GPI when the time comes to place the order, but I'm just curious in the meantime.