Quote:
Originally Posted by 47Ronin
Because the backspace of the 1LE wheel is 15 mm deeper.
|
I see what you mean now... 207-191=16mm. Don't pay attention to that measurement though.
Just pay attention to offset
The z/28 owner above runs 325s without issue he says, with his +32.25 oem z/28 wheels. So with 325s on a +41, that's roughly 9mm closer to the inside of the wheel well. However as the pics show of the calculator, the tire is flush with the opening of the wheel well. So you don't want to go too far more outwards. I doubt you need a full 9mm, if at all. Start with 3-5mm. You'll be fine