View Single Post
Old 11-10-2019, 05:22 PM   #5
Leo72793

 
Drives: 2011 2SS/RS
Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,227
Quote:
Originally Posted by lemontwist View Post
i didn't go active but i did go with high end components with nice crossovers. i used the factory speaker wire and extended it to the crossover and mounted them to the door behind the door panel.then ran a new tweeter wire from the crossover to the new tweeters they fit in the factory tweeter hole. back in the day i would have mounted the crossovers in the trunk on display they are nice and worth displaying and ran wires to the door.
the camaro don't look add wire friendly.but i have seen it done.
Leo72793 nice set up dude....
back in the day i was one of those guys that had a system worth more than the car good SQ and alot of SPL.the car was basically a way to move the stereo around LOL.
my camaro is well ok.the amp "rack"out of my old car fit so i just threw it in
the enclosure needed some reworking.
only doing around 1000 watts now and that's plenty for my getting old ass...
Nice. Yeah i wanted a nice sq setup that has decent volumes. So far i have the 6ch done. Got to decide on my sub setup. I want morel MW1054s but i also want to use my Boston 10.4LF subs from 1999, or go two new type X alpine 10s.
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels
•Vararam Ram Air Intake
•Speed Engineering Longtube Headers w/ Magnaflow HF Cats
•Bo White PnP Stage 2 TB
•GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression
•Xpipe w/ Res Delete and NPP Exhaust
•Tuned By Anonymous Calibrations
•Gen5DIY Mylink Conversion W/ Backup Cam
•Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle
•Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp
Leo72793 is offline   Reply With Quote