Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

AustexaSS · 12-31-2019, 08:47 PM

Agree as stated in post #80 and #81 by cdb95z28.

I was able to get -3.1 out of the factory set up without camber plates thus MrRaz28 something is off with your current setup. The Z/28 track day prep document indicates you should be able to achieve -1.5 +/- 0.50 degrees. There is more camber to be had beyond -3.5 as cdb95z28 states but a coilover with a smaller OD spring and seat is required because of the strut tower.

12-31-2019, 08:47 PM	#82
AustexaSS Build Date - Dec 08, 2014 Drives: 2015 Z/28, #1007, Black A/C Stereo Join Date: Oct 2015 Location: Austin, Texas Posts: 197	Agree as stated in post #80 and #81 by cdb95z28. I was able to get -3.1 out of the factory set up without camber plates thus MrRaz28 something is off with your current setup. The Z/28 track day prep document indicates you should be able to achieve -1.5 +/- 0.50 degrees. There is more camber to be had beyond -3.5 as cdb95z28 states but a coilover with a smaller OD spring and seat is required because of the strut tower.