View Single Post
Old 02-05-2020, 10:47 AM   #10
Greenhornet2

 
Greenhornet2's Avatar
 
Drives: 2011 Camaro 2SS LS3 Whipple
Join Date: May 2019
Location: Connecticut
Posts: 1,925
take out he plugs and try to turn the engine over by hand with the crank bolt if it won't turn you have major problems and will need to start teardown. drain oil see if there's metal take off the oil filter cut it open look for metal. If no metal and it won't turn then disconnect the torque converter and try to turn engine over again, if it will not turn over with trans disconnected the trans is locked up. RPMs revving and car not going anywhere sounds like transmission. as for clicking the battery is either too weak or the engine or trans is seized not allowing it to turn over.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
Greenhornet2 is offline   Reply With Quote