Quote:
Originally Posted by Rock-It Man
My 2010 Shop Manual says:
"The theft detergent module only acts as an exciter and antenna, energizing the key transponder and receiving the key code information. Because the immobilizer software is contained in the BCM, the theft deterrent module requires no programming or setup after replacement."
I realize this doesn't directly answer your question, but it suggests that replacing and/or reprogramming the BCM might be necessary.
|
Thanks for your reply. I don’t think that may be the issue, because this is most likely caused by the battery being dead for so long... but I’ll keep that in mind. I’m going to see if it will recognize the spare key, once I find it.