[cdb95z28]

I rebuilt my front 6 piston Brembos. The dust boots were lightly cracked. That was since the last rebuild which was in the summer of 2018. Otherwise the G2 Epoxy paint is holding up without any discoloration. Definitely a very durable paint for high heat.

The rebuild kit is from RockAuto.com, CENTRIC #14335037. Each kit does one caliper. Incidentally, this same kit works on the Gen 6 SS 1LE front Brembos and the Gen 6 ZL1 and ZL1 1LE. They all share the same piston diameters.
https://www.rockauto.com/en/moreinfo...98474&jsn=2236

I also upgraded to the Z/28 front wheel bearings, GM # 25954415 in an effort to better control dynamic camber on the track. The Z bearings are stiffer.
https://www.rockauto.com/en/moreinfo...98474&jsn=2244

And I upgrade to the Z/28 front LCA to also help the dynamic camber control. The Z LCA bushing is indeed stiffer than the 1LE front LCA. Part #s 23105015 and 23105014