Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

mSStrblSStr39 · 08-24-2020, 10:46 AM

So I lowered my car with BMR 1.4 springs and needed to get it aligned. I had to buy the SPC bolts to be able to get the back into spec. While at the shop the tech told me he couldn't get the top drivers side stock bolt out due to the gas tank being in the way. Anyone ever heard of this before?
I've seen a few threads on needing to get the bolts for proper alignment but nothing about the tank having to be removed to install one.

08-24-2020, 10:46 AM	#1
mSStrblSStr39 Drives: 2014 Chevy Camaro 2SS Join Date: Jul 2020 Location: Ocala, Florida Posts: 5 View My Garage	2014 SS alignment issue So I lowered my car with BMR 1.4 springs and needed to get it aligned. I had to buy the SPC bolts to be able to get the back into spec. While at the shop the tech told me he couldn't get the top drivers side stock bolt out due to the gas tank being in the way. Anyone ever heard of this before? I've seen a few threads on needing to get the bolts for proper alignment but nothing about the tank having to be removed to install one.