Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Halltech's Yellow Jacket Carbon Fiber CAI=14 RWHP/10.6 lbs-ft

Halltech · 10-27-2009, 03:38 PM

This is the Halltech Yellow Jacket CF without the optional 102mm MAF housing. If you have a stock Camaro, and do not want to tune your car, stay away from this intake, and wait until our production plastic version arrives for $399. Heat shields are included on both styles.

We got 14 RWHP/10.6 lbs ft. on our stock Camaro with our prototype plastic version. Tentative release date 11-25-09.

This is our CAD drawing. The package will include the high temp silicone hose, PCV nipple, intake tunnel, heat shield and our 8" filter. The 9" touches the fender well, and some may not want this situation. The heat shield will align the intake so that the filter does not touch the windshield washer reservoir; We can include the 9" to replace the 8" at no additional cost if this is not an issue.

Our testing shows that the heat shield allows constant cold air, which keeps Outside air temps and intake air temps within 4 degrees of parity.

10-27-2009, 03:38 PM	#20
Halltech Drives: 2010 Halltech Camaro SS, 2008 C6Z06 Join Date: Sep 2009 Location: Milwaukee, WI Posts: 363	This is the Halltech Yellow Jacket CF without the optional 102mm MAF housing. If you have a stock Camaro, and do not want to tune your car, stay away from this intake, and wait until our production plastic version arrives for $399. Heat shields are included on both styles. We got 14 RWHP/10.6 lbs ft. on our stock Camaro with our prototype plastic version. Tentative release date 11-25-09. This is our CAD drawing. The package will include the high temp silicone hose, PCV nipple, intake tunnel, heat shield and our 8" filter. The 9" touches the fender well, and some may not want this situation. The heat shield will align the intake so that the filter does not touch the windshield washer reservoir; We can include the 9" to replace the 8" at no additional cost if this is not an issue. Our testing shows that the heat shield allows constant cold air, which keeps Outside air temps and intake air temps within 4 degrees of parity. Last edited by Halltech; 10-27-2009 at 03:57 PM.