Quote:
Originally Posted by Blubird68
So I’m trying to get the dreaded bolt for the oil pump on the pickup tube. I unbolted all the oil pan bolts, the 2 going from the bellhousing, the plastic starter shields are off and I only have one bolt left on top for the oil cooler but the pan isn’t moving at all. Even tried tapping it. I can’t figure it out and it’s frustrating me. It’s just crazy to me it’s still being held on with nothing
|
You have to unbolt the starter. There are two 13mm bolts. Once these are out or loose enough, that should release the pan. The starter won’t fall or come out, it will hang in place.