I had all of mine loose and still needed to tap it slightly with a deadblow to dislodge it. Recently did the oil pump swap myself, wasnt that bad minus dropping the bolt in the pan lol
Highly recommend keeping rags in the pan, under the bolt until it is tightened down. I accidentally dropped mine in the pan but was able to fish it out with something like this: https://www.homedepot.com/p/Lisle-Mi...6540/207011197
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53
|