[Camaro162]

Hi everyone! I have a full front and rear set of brand new, never installed Brembo brake pads, and I don't have a use for them. I'd like to find someone who can use them, and get them out of my garage:




These are for Brembo GT 6-piston (front) and 4-piston (rear) systems.





The markings on the pads are as follows:


Set #1:
"Brembo 07.9551.13" ; "FERODO HP 1000":"RACING INSPIRED"


Set #2:
"Brembo 07.8645.16"; "FERODO FM1000 FFA14"; RACING INSPIRED"; "319"



To confirm their application, I e-mailed Brembo, and the following is what they told me about the pads:

Front (07.9551.13 Pad Number) pads;
Ferodo FM1000 street compound for wide annulus 6-piston“N” system. These pads are used in our “N” calipers, these are 6-piston calipers that are used in conjunction with a wide annulus disc. Standard annulus is roughly 53mm in our GT systems, with wide annulus being 61.5mm. So these pads are designed to account for the additional ~8.5mm of disc surface area. Any of our systems that have “N” as the 2nd character would use this pad shape.

Rear (07.8645.16 Pad Number) pads;
Ferodo FM1000 street compound for standard annulus4-piston B/H/P systems. These pads are used in most of our 4-piston systems and can be used with 345x28mm – 380x28mm disc assemblies.


I do not have the original packaging or the hardware.


Asking $300 OBO + shipping (they weigh ~14lbs, if you want to estimate the cost) from NYC metro area. I will not separate - must buy all 8 pads.